Product Description

[Main Features]
- Radius 391mm curve angle of 45 ° width 37mm wide curve cant rail.
- Painted the ballast and sleepers, very beautiful appearance.
- Comes with a cant curve outside of the rail is higher than inside, I enjoy traveling the train tilts on the inside as the real thing.
- Kant inclination angle is about 4 °.
- Rail each other and can be combined with snap with a nail, is an easy and reliable connection.
- There is a connection compatible with conventional TOMIX rail.
- Also supports single line piers sold separately. Others, fence, railing, the rail side the side wall and can be mounted. It also supports various overhead wire pole mount.
- Can be used as a double track rail by concatenating C354-45-WP sold separately on the inside.
- If you install during the coupling for wide rail slab rail on the bottom surface to use as a double track rail and also supports multi-line effect pier.
- Is mounting a feeder for wide rail slab rail on the underside, to power. (Possible feeder for slab rail also mounting. Traditional feeder not be installed)
- Sensor for Wide Rail slab rail can be easily installed by removing the hatch. (For slab rail sensor, one-touch mounting sensor Not installed)

[Information]
※ This product can be installed, such as the following products. For more information, please read the description of the described in the instructions that come with the product, or the product of the package.
· <3084> in the wall for wide rail C391 · C354 outside (three × 8 pieces)
· <3085> in the wall for wide rail C428 · C391 outside (three × 8 pieces)
· <3094> single line for wide rail bridge pier base C391-22.5 (8 pieces)
· <5567> sensor for TCS wide rail slab rail
· <5593> tread type noise canceller (input two)

[Note]
※ This product can not be used in conjunction with the following products.
· <5537> <5538> other than the DC feeder N
· <5567> other than the sensor
· <5592> feeder shaped noise canceller

[About the wide PC curve rail connection]
- Wide PC curve rail, Kant real to just like (the outer rail of the curve is laying higher than the inner rail, line structure to mitigate the centrifugal force to tilt the vehicle) comes with. Therefore, and wide PC curve rail, between the wide PC straight rail and various conventional Tomix rail, left and right rails gradually stick is tilted from the horizontal to the diagonal, you need to connect a wide PC approach rail. In reference to the corresponding sections and illustrations, please properly connected.

[Note]
- And you read well the instructions of Naka, please use correctly.
- The color of the rail track bed is, you may have the coating method on the rose with. Please acknowledge.
- Illustration, Photography might be different products and some.



Item Size/Weight : 34 x 7 x 2.2 cm / 128g

Product Specifications

Item series

Track

Item code

1774

JAN code

4543736017745

Purchase Information