Photodetector yoke robo (Science / Craft) - HobbySearch Hobby Tool Store

This item is limited to 3 per household.

Copyright EK Japan CO, LTD.All Rights Reserved.
Check Screwdriver out also.
Check Nipper out also.
Check Pliers out also.
See OLFA Cutter (Hobby Tool) also.
See also.

- [Shade light sensor Lobo] is, to find an obstacle in the light sensor as its name, is a robot that runs while repellent.
- In the place where there is no obstacle, and the forward while emitting light from the light-emitting diode. If there is an obstacle ahead, the light emitted from the light-emitting diode is reflected. To catch the reflected light on the sensor, and the dodge action obstacles.
- The mechanism to move the tire uses the idler drive system]. Rotation of the shaft of the motor is a simple method as it is transmitted to the tire, making it easy to understand is how the tire turns.
- Use batteries (sold separately): 3 AA alkaline batteries
- Current consumption: 220mA (no load)
- Difficulty 3
- Work time: 3 to about 4 hours
- Age: 10 years of age or older.
- The number of parts: 75 points
- Necessary to work tools: Driver (plus), nippers, pliers, cutters, soldering iron
※ soldering practice board containing

Item Size : 20 x 13 x 5.5 cm