- Choose from four flash modes.
- The brightness and blink rate of the LED can be adjusted easily, is a LED lighting board kit.
- Red LED (φ5mm) has been one included.
- Built-in and easy to the small circuit board.
- You will be mounting the LED of the same model number up to three.
- Tone assemble to choose one of the favorite from the four modes of light flashing A · Flashing B · random flashes.
1: Dimming: adjust the brightness with volume
2: Flashing A: flashing Innovation Pikappika', adjust the blink rate in the volume
3: Flashing B: flashes when Jiwajiwa, adjust the blink rate in the volume
4: Random flashes: light and dark is randomly changed as the fluctuation of the candle flame
- Easy connection to the LK-CB1!
- Small relay board kit (for 5V) LK-RB1
- Is a kit that small relay and the drive circuit as a set.
[Caution]
※ LED is increasing up to three, but the emission color Please use the LED of the same the same model number.
Attach mix emission color different and not well lit.
※ You can change the color of light emitted favorite only to replace the LED,
When the forward voltage to exchange the LED of high white and blue, please use 4.5V to power.
- Power supply voltage /DC3-4.5V (required stabilization)
- Current consumption / about 15mA (maximum)
- Board size / 25 × 35mm
( This is a machine translation. Please allow for possible misinterpretations in the text. )