1/80(HO) Interior Parts Set for Tramway Product HO Series 20 `Sakura` [Nissha Version, Series 20-0] (for 6-Car) (Model Train) - HobbySearch Model Train HO/Z Store

This item is limited to 50 per household.

- We will launch new bed parts expressing flower form of a sleeping limited express passenger train and parts of the 20 series car.
- We are expressing the inside of the couch, the inside cabin moquette, the seat cover with cloth seal and cutting seat.
- We set a set for initial asakazaki, Sakura, we are also classifying for day and Hitachi.
- Please do use it for upgrading your existing vehicle.

[Sakura set contents]
- Crab 22 (end face / generator part)
- Narone 22: Each one
- Pear 20: 1 both
- Naro 20: 1 Both
- Nahane 20: 1 Both
- Najaf 21: 1 Both

- Please remove the seal from the backing and paste it on the relevant part.
- We are using a laser processing machine for cutting. We care enough for cutting, but please cut off the part which is not completely cut with a cutter etc. so as to trace.
- Please cut off the paper parts and paste them on the back side with double-sided tape etc.
- Parts where molded ribs and the like are obstacles are cleanly finished when they are cut off and pasted in a form avoiding the relevant part. (There is also a spot placement point.)
- Please go 1 day a day with reference to processing.
* Although we are making reference to actual cars, there are parts that differ from the actual cars depending on the used parts. Please note. Moreover, we can not assume responsibility such as damage during processing.
- Materials used: paper, cutting sheet, acrylic

Item Size/Weight : 29.5 x 15 x 0.5 cm / 48g