Sanding Slider (1 Piece) (Hobby Tool) - HobbySearch Hobby Tool Store

This item is limited to 10 per household.

- For advanced users. Special file sanding file auxiliary tool for polishing end face

- Slide the H type block with the sandpaper attached on the aluminum pedestal rail and use it for polishing the end face of the object.

- Frames of the guide for sending out the object can be fixed at any angle of 30 ° · 45 ° · 60 ° · 90 °, pushing against the frame, polishing by gradually delivering the object with the finger, It can be machined to any angle.

- POM resin is adopted as a slide block.
- The coefficient of friction with the aluminum material used for the pedestal is extremely low, so you can slide it smoothly without using a lubricant and you can polish it.

- Contents
· Sanding slider (Aluminum pedestal + guide frame + 2 screws (+ reserve 2 pcs) 1 set
· Slide block (made by POM) 1 piece
· 1 sticker seal
· 1 logo seal
※ Reference pedestal size 150mm x 75mm

- Double-sided tape (Nitto No. 5000 N 25 mm width recommended)
- sandpaper
- Phillips screwdriver (No. 2)
Is required. Please purchase separately

Item Size/Weight : 16.6 x 8.5 x 3.6 cm / 273g