[Leisure driving on the Wagen Bus that has been loved around the world]
-Commercial vehicle type 2 that was developed based on the Volkswagen Beetle (type 1) and appeared in 1950.
-Also called [Wagen Bus], it is an assembly kit of an electric radio control car that models the early type 2 (T1) that has been loved by enthusiasts around the world due to its unique style.
-Among many variations, the kit reproduces the popular [23 windows] with four windows on each side of the roof and windows in the rear corners.
-A flat but totally rounded retro form, an amorous front mask reminiscent of a human face, fully modeled with polycarbonate.
-Window frames, front emblems, door handles, etc. are expressed with stickers.
-A mask sticker for windows has also been set.
-Finish with your favorite two-tone color and enjoy a leisurely drive.
[Uses M-06 chassis with rear motor and rear wheel drive]
-The chassis adopts rear motor and rear wheel drive M-06. The bathtub type frame is laid out with the battery for running vertically.
-Servo, ESC, and receiver are placed on the left and right sides of the battery to create a high weight balance, and heavy objects are mounted almost within the tire height to achieve a low center of gravity.
-In addition, a 60D radial grip wheel with plenty of mood is mounted on the front wheel and a 60D super grip radial with excellent grip on the rear wheel.
-The stability of the rear is increased and the characteristics are easy to control.
-Suspension is independent of 4 double wishbone wheels.
-Adopts a cornering characteristic that adopts a steering wiper of 3 divisions.
-Also, the rear section has three mounting positions.
-Choose from three types of wheelbases: 210, 225, and 239mm, expanding the range of choices when replacing the body.
-Length 426mm, width 195mm, height 177mm
-Wheel base 239mm
-Tread front and back 138mm
-Drive system = Rear motor, rear wheel drive
-Differential gear system = 3 bevels
-Steering tie rod = 3 split
-Suspension = Double Wishbone 4 wheels independent
-Damper = front and rear friction
-Gear ratio = 5.8: 1
-Motor = 540 type
-Tire width / diameter = 25 / 59mm for both front and rear
[Separately required items]
-Fine Spec 2.4G Electric RC Drive Set (RC Model)
-4 AA batteries for transmitter
( This is a machine translation. Please allow for possible misinterpretations in the text. )