-MC-8 is a multi-controller that can control 8 channels of devices controlled by PWM signals.
-Since servos and speed controllers controlled by PWM signals can be connected, it is possible not only to control RC cars, but also to wirelessly control a variety of machines such as tanks, heavy equipment, machine sets and homemade robots.
-Steering method is 4 channels for stick operation and 4 channels for button operation.
[8 channels can be controlled]
-The radio control channel indicates the number of active parts that can be controlled simultaneously.
-Conventional RC cars typically have 2 to 4 channels, but MC-8 can use up to 8 channels of CH-A to H at the same time.
[When using with RC cars ...]
-RC car is generally controlled by two channels of steering (car steering wheel) and throttle (car accelerator & brake), but this is done by stick operation.
-Depending on the amount of this stick, the steering angle and motor rotation speed can be controlled linearly so that the machine can be controlled freely.
[Examples of items used in 1/10 touring cars and M chassis]
-Wireless controller: MC-8 + MR-8
-Speed controller: VFS-FR2, steering servo: PDS-2503
-Battery: Lithium ferrite battery (Li-Fe2 cell)
* Can be purchased with 10712MC-8EP Set B (PDS-2503 + VFS-FR2).
[Example items for Star Unit (Lunch Box MINI, Dancing Rider, etc.)]
-Wireless controller: MC-8 + MR-8
-Speed controller: MD-1
-Steering servo: PDS-2503
-Battery: AAA alkaline battery
-Switch harness BEC (for MR-8)
* Available with 10711MC-8EP Set A (PDS-2503 + MD-1).
[MC-8 spec]
-2.4GHz MX-F multi-controller
-Size: 150.0 × 84.5 × 61.0mm
-Weight: 145.5g (without batteries)
-Power supply: AAA batteries, 4 AAA rechargeable batteries (sold separately)
-Current consumption: 50 mA or less Can be used continuously for 17 hours or more (varies depending on conditions)
-Number of channels: 8 Stick operation 4 systems + Switch operation 4 systems
-Transmission frequency band: 2.4GHz
-Radio wave reach: 50m on one wing
* Increases / decreases depending on environment and receiving antenna condition.
-Supported receiver: MR-8
* FHSS compatible receivers such as KR-211FH cannot be used.
-Made in Japan
( This is a machine translation. Please allow for possible misinterpretations in the text. )