No.604 Water Surface Expression Material Set : Sea (Beach) (Material) (Model Train) - HobbySearch Model Train N Store

*Sorry. As for this article, production was canceled. Therefore I can sell only what in stock to you.

[set content]
-No.0043 Acrylic color for seabed Ultramarine Blue 20ml
-P Water Expression Material Gross Polymer Medium 50ml
-G1 Wave Expression Material Gel Medium 50ml
-7 Wave front expression material blended fiber 50ml
-No.205 R Color Plaster Natural (for sandy beach) 66ml
-No.525 Koiwa Gray 10ml
-No.526 Nakaiwa Gray 10ml

[Creation procedure]
-R Color Plaster No.205 Natural Add 10-30% water to knead well to make a paste. Sandy beach is slightly thicker with fingers so that natural undulations can be expressed. Fill the seabed thinly and keep it smooth with a pallet knife. After serving, place the attached stones. It dries in about one day and the stones stick together.
-Paint acrylic paint on the sea floor. Dry in about 2-3 hours.
-Apply a water expression material or gross polymer medium to the brush and pour it in 1-2mm thick. After applying, keep the water level and dry. It dries and clears in about 1 day. If cracking occurs, apply it so that cracks are filled again after drying completely.
-Paints waves and undulations by applying irregularities to the wave expression material and gel medium with a brush. This also becomes transparent after drying (about half a day).
-Paint the crest / blended fiber over the wave with a small brush. Splash of a crest and white waves can be expressed. (Dry in 3-4 hours)

-You can create a water surface of about 30 x 30cm with the set of water expression materials (gross polymer medium).

Item Size/Weight : 18 x 13 x 4 cm / 339g