――It is a very small size blade that is supposed to be used only in delicately made situations.
--A specially shaped blade tool for streak carving that has moderate elasticity and is characterized by smooth sharpness.
--The screw on the grip represents just above the blade.
――The angle of the instruction manual is not always the correct answer for the angle to hit the blade.
――It depends on the material and the width of the blade, so please use it as a guide.
――Please note that even high-carbon steel with elasticity will be damaged if it is used by twisting it in a gap.
[Caution for carving]
--So-called streak carving.
――The appropriate angle depends on the hardness of the material to be processed.
――The appropriate angle is the angle at which shavings such as shavings are generated.
[Caution for left and right carving and scraping]
――If you want to carve left and right (horizontally pull) or scrape, do not use any force and fix only small burrs, burrs, and adhesive squeeze out.
――If you want to cut a wide area continuously and roughly, please use the upper size.
--0.04mm width is a very small size blade that is intended for use only in delicate construction situations.
--Grip: Diameter 7.2mm (Grip part 9.0mm) x Length about 123mm
--Material Tip blade: High carbon steel, Grip: Aluminum (anodized)
--Processable material: Non-hard resin such as plastic, lost wax, urethane resin, etc. (* No metal)
- Country of Origin: Japan
( This is a machine translation. Please allow for possible misinterpretations in the text. )