- This is a coreless motor power unit that can be used in finished vehicles, including the separately sold [Unpainted/Colored Economy Kit].
- High-performance motor and gear system allow you to enjoy stable driving even at low speeds.
- Can be installed on commercially available vehicles, including the Green Max Economy Kit, through user processing. (Depending on the combination, processing on the vehicle body or power unit side is required)
- Please note that the [truck frame] and [underfloor equipment] are not included with this product and must be purchased separately.
[About 20m class A]
- Compatible with 20m class vehicles. It is a common length. (Some vehicles with long wheelbases, such as old models of national electric trains, are not supported)
*Parts for the seat part are not included.
[Product features]
- This is a power unit that can be used for 20m class trains seen on Japanese National Railways, JR and private railway companies.
- The coupler has a short pocket overhang.
- Enjoy stable running from low speeds with a coreless motor with a high-performance flywheel and a gear system with low running resistance.
- For vehicles with a narrow inner width, the width of the power unit can be reduced to 15mm by cutting out the resin ribs that protrude from the side of the power unit.
- Commercialized the coreless motor power unit with some parts grayed out.
- Ideal for incorporating into vehicles with gray trolleys and couplers.
- Gear case, truck cover (coupler box), and coupler are molded in gray.
*Some parts of the model may differ from the actual product. Please note.
[Product set composition/specifications]
- Coreless motor power unit x 1 car
- Overall width (including protrusions): 16.6mm
- Overall width (excluding protrusions): 15mm
- Total length between connecting surfaces: 136.95mm
- Floorboard total length: 128mm
- Distance between trolley centers: 91.4mm
- Wheelbase: 13.5mm
- Wheel diameter: φ5.7mm
*Please use items sold separately for the trolley frame and underfloor equipment.
*Some processing may be required to install the power unit to the vehicle body.
[Notices]
- Compatibility table (PDF file) for the power unit and trolley/underfloor equipment set required when replacing the conventional power unit (2 motor power) used in the finished product of the product number 4000 series with a power unit equipped with a coreless motor. Please refer to the.
[Information on main related products currently on sale/scheduled to be released]
- No.8311 Auxiliary weight for coreless motor power unit (4 pieces)
- No.8312 Universal shaft (4 types, 2 pieces each)
( This is a machine translation. Please allow for possible misinterpretations in the text. )