Product Description

――One of the endurance race specifications with a beautiful blue color !!

[About the actual vehicle]
――At the Nürburgring circuit in Germany, which is known worldwide as the venue for 24-hour races, a series of endurance races of 3.5 to 6 hours is held every year.
――Participating vehicles are commercial touring cars including GT3, and the number of participating vehicles in each race is 170, which is a popular event.
――The series started in 1977 and boasts a long history and tradition.
――All nine races were scheduled to be held in the 2020 season, but due to the influence of the new coronavirus, the first to third races were canceled.
――The Adenauer ADAC Circuit Trophy Race on June 27th, which was originally scheduled for Round 4, has begun.
--The race was won by BMW's customer team, Walkenhorse Motorsport's BMW M6 GT3.
――The machine is a commercial racing machine that meets the GT3 category regulations set by the FIA, and the engine is equipped with a 4.4-liter V8 twin turbo.
--The drivers are British David Pittard and Danish Mikkel Jensen.
――I ran through the circuit with a sponsor familiar in Japan.

[About the model]
-The model is a plastic model assembly kit that reproduces the BMW M6 GT3 of Walkenhorse Motorsport, which won the overall victory in the Adenauer ADAC circuit trophy race of the Nürburgring endurance series held in June 2020, on a 1/24 scale.
――The flowing coupe style, the powerful bulge of the front and rear over fenders, and the mechanical cockpit are all expressed with a total length of about 206 mm and a total width of about 85 mm.
――Including the slit of the air outlet of the fender, the air outlet of the bonnet is also reproduced in the body, and it is a three-dimensional finish with the front grille, rear panel, rear wing etc. of other parts.
――In addition to the seats, dash panels, equipment installed on the floor, the roll cages stretched around, and the door lining, the detailed modeled interior reproduction conveys a sense of urgency.
――You can't miss the coloring with the sponsor logo, which is familiar in Japan.
――In addition, etching parts and carbon decal sets that enhance the details of the finish are also on sale. Please use it together.

[Major features]
--Reproduce the BMW M6 GT3, the winning machine of the Adenauer ADAC circuit trophy race, which was the opening race of the 2020 Nürburgring endurance series on a 1/24 scale.
-Marking is car number 34, reproducing the Walken Horse Motorsport machine supported by a sponsor familiar in Japan
--Plastic model assembly kit with a finished total length of about 206 mm
-Not only the body style, but also the interior where the roll bar is firmly reproduced is real
* The image is under development. It may differ from the actual product.
* Prices and release dates are subject to change without notice. note that.

--20210201: Platts has contacted us to change the `product name`,` actual vehicle`, `model`,` main features`, and `detail-up parts product name`.


Item Size/Weight : 32.5 x 21.5 x 6.7 cm / 406g

Product Specifications

Car manufacturer

BMW

Item code

PN24027

JAN code

4545782122237

Purchase Information