- This is a coreless motor power unit that can be used in finished vehicles, including the separately sold [Unpainted/Colored Economy Kit].
- High-performance motor and gear system allow you to enjoy stable driving even at low speeds.
- Can be installed on commercially available vehicles, including the Green Max Economy Kit, through user processing. (Depending on the combination, processing on the vehicle body or power unit side is required)
- Please note that the [truck frame] and [underfloor equipment] are not included with this product and must be purchased separately.
[About [20th grade B]]
- Compatible with 20m class vehicles. Although the body is long, it is for Kintetsu vehicles that do not use 21m class. (Some vehicles with long wheelbases, such as old models of national electric trains, are not supported)
*Parts for the seat part are not included.
[Features]
- The total length of the floorboard and the distance between the trolleys are the same as <5711> coreless motor power unit (20m class A) and <5750> coreless motor power unit (gray, 20m class A), but the coupler has a large pocket overhang, This is a power unit that increases the distance between connecting surfaces by a little less than 3mm.
- Can be used on some Kintetsu vehicles.
- Enjoy stable running from low speeds with a coreless motor with a high-performance flywheel and a gear system with low running resistance.
- For vehicles with a narrow inner width, the width of the power unit can be reduced to 15mm by cutting out the resin ribs that protrude from the side of the power unit.
- Commercialize the coreless motor power unit with some parts grayed out.
- Ideal for incorporating into vehicles with gray trolleys and couplers
- Gear case, trolley cover (coupler box), coupler are molded in gray
*Please use the trolley frame and underfloor equipment sold separately.
[Set composition/specifications]
- Coreless motor power unit for 1 car
- Overall width (including protrusions): 16.6mm
- Overall width (excluding protrusions): 15mm
- Total length between connecting surfaces: 139.6mm
- Floorboard total length: 128mm
- Distance between trolley centers: 91.4mm
- Wheelbase: 13.5mm
- Wheel diameter: φ5.7mm
*Please use items sold separately for the trolley frame and underfloor equipment.
*Some processing may be required to install the power unit to the vehicle body.
[Compatible car models]
- Kintetsu commuter cars 22600, 21020, 16000 series, etc.
[Notices]
- The power unit and trolley/underfloor equipment set required when replacing the conventional power unit (2 motor power) used in the finished product of the product number 4000 series with a coreless motor equipped power unit are listed in the correspondence table (PDF file) )Please refer to the.
( This is a machine translation. Please allow for possible misinterpretations in the text. )