MR-8 2.4GHz MX-F (Only a Receiver.) (RC Model) - HobbySearch RC Model Store

This item is limited to 3 per household.

[ Related Products ]
- MC-8 2.4GHz MX-F Receiver-Transmitter Set w/MR-8

[Multi receiver MR-8 for MC-8]
-MR-8 is a dedicated receiver for MC-8 (a device that receives radio waves and outputs electrical signals).
-The signal format output from MR-8 is the same as that used in conventional RC car devices (servo, ESC). (eXpartBuild) is a design that can be used with RC equipment of completed kits (* 1).
-[No confidence in assembling RC cars] [No time for assembly] (* 1): Tamiya model (TAMIYA) XB series, KYOSHO RTR survey.
-Operation with all RTR and XB sets such as overseas products is not guaranteed.
-MC-8 has a [Reverse] function to change the direction of operation, so the direction of movement can be changed depending on the mounting direction of the servo or ESC.
-Also, if you set [Endpoint], you can prevent servo damage due to excessive steering.
-The functions necessary for RC car operation are covered, so even RC car experienced people can use it without dissatisfaction.

[Easy installation on RC cars]
-MR-8 is very easy to handle, just plug the RC device connector into the connector corresponding to the channel you want to use with MC-8.
-For example, if you want to operate the steering with the MC-8 CH-B, insert the steering servo connector into the MR-8 B.
-The steering servo can be controlled by turning on the MR-8 after turning on the MC-8.

[Easy connection to microcomputer board]
-The signal format output from MR-8 is PWM (PulseWidthModulation).
-Since it is the same as the control signal of a very general RC servo motor, it can be easily connected to a microcomputer board such as Alduino.

[MR-8 spec]
-2.4GHz MX-F multi receiver
-Size: 27.0 × 28.0 × 15.0mm
-Weight: 7.0g
-Power supply: 3.0 to 6.6v
-Usable power supply: dry battery or rechargeable battery (Ni-MH 3 ~ 5s, Li-Fe 1 ~ 2s, Li-Po 1s)
* Be careful of voltage drop when using lithium batteries.
-Current consumption: 40 mA or less (during reception operation)
-Number of channels: 8
-Reception frequency band: 2.4GHz
-Compatible transmitter: MC-8
* Cannot be used with FHSS transmitters such as EX-2.