- A new addition to the Mail Baggage Train series.
- This time, we will produce Kumouni 8250 and Kumouni 74 Hatao factory remodeling type.
- Kumoyuni 8250s is the same type as Kumoyuni 820s but has two pantographs.
- 104-107 and 202-204 are applicable for Kumouni 74 Hatao factory modified car.
-The headlights are the same shield beam type as the Takatori factory type already on sale, but the front direction curtain is larger, the luggage compartment window is square, the bottom corner of the luggage door is rounded, and the rain gutter installation position is higher. You can see the difference.
-There is a difference in the cold and snow resistance equipment of the underfloor equipment between the 100 series produced for the Nagoya area and the 200 series produced for the Takasaki and Tohoku areas, and the latter is covered by the brake control device, resistor, and MG. It was attached.
- The kit is an etched and pressed car body similar to the conventional luggage train.
- The front of Kumouni 74 is a new production of Lost exclusive parts.
- It is the same as the conventional product that the guideline is molded so that details such as rain gutter and nickname plate insert can be easily attached.
- Various parts around light parts and pantographs are included.
- Underfloor equipment, trolleys, pantographs, couplers, and instant letters are purchased separately.
- Underfloor equipment for Kumouni 74 is newly manufactured for each number.
- The 200 substitute comes with an etched resistor cover frame and MG cover frame. (Kumouni 82 uses the already released [PH-12024 & 025]) In addition, we will also manufacture marking letters for these vehicles.
[Kumouni 74 (Hatabu remodeled car: shield beam, square window, high rain gutter type)]
-The 100th generation is for the Nagoya area, and the 200th generation is for the Takasaki/Tohoku line. The 100th generation cars were later transferred to Makuhari Ward for 104 and 107, and Tamachi Ward for 105 and 106.
- In the 200th generation, 202 and 203 turned to Kozu Ward, but 204 was placed in Shin Maebashi Ward until it was scrapped.
- The kit is designed to make 100s and 200s separately by selecting underfloor equipment.
*The figure shows the 200s
( This is a machine translation. Please allow for possible misinterpretations in the text. )