- The 131 series is a suburban train that began commercial operation in JR East in 2021, with the 0 series on the Boso lines, the 500 series on the Sagami line, and the 600 series on the Nikko Line and Tohoku Main Line in the Utsunomiya area.
- Among them, we will commercialize the 0 series in the Boso area and the 600 series in the Utsunomiya area.
- The car body is made of laser-cut paper, the floorboards and window glass are made of acrylic, and the front and some parts are made of 3D printed parts.
- Separate power, trolley, coupler, roof antenna, etc. are required.
- Stickers and decals are included for the body band, car number, etc.
- Vehicle body: made of paper
- Front: 3D printed parts
- Glass etc.: Made of acrylic
[Product Summary]
- This is a paper car body kit that has been cut using laser processing. Although it is a simple kit, it reproduces even the finest details,
[Kit contents]
- Paper parts for the body and underfloor equipment (simplified representation)
- Acrylic parts such as lights, window glass, floorboards, etc.
- 3D printed parts on the front etc.
*The material is unpainted. Painting is required after assembly.
[Features]
- 3D printed parts are used for the front, etc., which are difficult to assemble and express with paper.
- Stickers are included on the side bands. In addition, decals are included for the front dot pattern and car number etc.
- Comes with a specially designed floorboard. If you prepare the recommended trolley, power, etc., you can make it run without complicated machining. (Powered by coreless power truck)
[Separately prepared items]
- Power: Tenshodo coreless power truck 26Pφ10.5P
- Trolley: Nikko Model Dolly DT80, Nikko Model Wooden Floor Board Center Pin or Katsumi DT80 (Pivot Plane), Katsumi Dolly Center Tweezers
- Wheels: Pea 5304φ10.5 single pivot, etc.
- Coupler: IMON coupler HO-265 or Pea coupler, Pea coupler mounting seat
- Pantograph: Substitute with IMON PS33D, Katsumi PS35C, etc. IMON upper and lower insulators, mounting screws
- Screws and nuts for fixing the floorboard: M2 screws and nuts (please purchase ones with a length of 6 mm to 10 mm at home centers, etc.)
*The floorboard is designed with the above trolley and coupler. If you use other trolleys or couplers, please devise your own ideas.
- Manufacture and sales: M's Craft Co., Ltd.
- Licensed for commercialization by JR East Japan
( This is a machine translation. Please allow for possible misinterpretations in the text. )