|
pat
:
2020/12/27 23:00:19
Really nice modelkit, requires a little work because of the decals but other than that pretty nice kit!
|
|
dante wallace
:
2020/09/21 13:42:29
This is an outstanding kit and was an absolute joy to build!! But I would only recommend it for seasoned builders as it is a skill level 5 kit. Parts fit and finish are excellent throughout. Decals are excellent with zero carrier film around the edges. I really hope to see a short wheelbase version of this sometime in the near future. It would be an immediate purchase for me.
|
|
Ryan
:
2020/07/01 3:04:09
Very disappointed in the customer service. Bought the Corolla and another model together. The other models decals look perfectly fine. As you can see they are completely shot. Even the protective sheet has bleed through on it. This kind of thing happens but what's most disappointing is after emailing their support , completing the online form and responding to that email. A week later I still have had no response on this matter or Hobby Search willing to rectify the situation in anyway.
|
|
Conforto
:
2020/04/07 20:49:54
The most beautiful F1 car of all times! A great model from Aoshima.
|
|
Laurence
:
2020/02/25 17:40:19
|
|
nobody
:
2019/12/27 17:34:33
|
|
MattBacon
:
2019/11/12 21:18:54
Great kit of a fabulous original. It's tricky getting the rear end together, with relatively few areas that join. And for full accuracy, you need to rework the rear wheel arch area to remove the small triangular "wall" at the top where the fenders join the rear deck, which is not there on the real thing -- it's a smooth blend in real life.
|
|
No Name
:
2019/04/28 22:42:56
Will the 2018 version of ferrari f1 be released this year? Thank you!~
|
|
No Name
:
2019/04/28 22:42:00
Will the 2018 version of ferrari f1 be released this year? Thank you!~
|
|
No Name
:
2019/04/28 22:41:24
Will the 2018 version of ferrari f1 be released this year? Thank you!~
|
|
passerby
:
2019/03/29 9:52:25
@No Name: ...damn, took me a while before I realized that was not a real car. Great work.
|
|
No Name
:
2019/03/28 23:06:35
|
|
Yan
:
2019/03/26 15:12:16
|
|
drg73@hotmail.com
:
2019/02/07 19:57:38
hello are to request if shipped in Italy and in my cart I put 2 Ferrari 1.12 cars that are currently not available when they arrive? Thanks waiting for your answer Gianni
|
|
Ded_Troy
:
2019/01/19 17:48:26
Tire width 10 mm Disc width 11.5 mm
|
|
Turbojett
:
2019/01/18 22:50:26
That's a 1965 Impala, not a 1966.
|
|
passerby
:
2019/01/05 10:00:28
@Ronny: if it was close to the original decals, Shunko Models would be sued by Tamiya... you should have checked the product photo on the product page before purchasing...
|
|
Ronny
:
2019/01/04 20:55:43
Just have to say this is not close by be the original decals that is on the right at the picture. I bought this decals because the original ones is aging but the new ones dose no benefit.
|
|
model maker
:
2018/11/26 20:23:11
This is a great model with few issues. The interior color is not clarified in the instruction. Rear wheels need some work to fit inside the body. Front grill could be like rear grill which is great. Model in pictures is almost ready.
|
|
No Name
:
2018/09/20 17:49:46
Added carbon fiber decals, PE seatbelts, foot pedals & brake discs. Would've liked fatter tires.
|
|
payaso25us
:
2018/09/17 0:26:25
good item, easy to assemble need to make more honda smx owners club uk await
|
|
No Name
:
2018/09/09 17:27:33
Custom paint job + PE brake discs & seat belts + carbon fiber side skirt decal = fun
|
|
No Name
:
2018/09/04 17:12:13
|
|
Ken Nguyen
:
2018/08/05 6:05:42
Excellent and sharp body kits. Fast delivery. Excellent shop
|
|
Dancraft
:
2018/07/14 17:15:26
|
|
bugy
:
2018/06/26 7:50:52
|
|
Ice rain
:
2018/06/13 13:13:15
|
|
mortsorkonbonok
:
2018/05/30 3:05:03
|
|
murphy
:
2018/04/10 13:45:05
|
|
No Name
:
2018/03/16 16:24:50
|
|
No Name
:
2018/03/16 16:14:09
|
|
Maxim Begma
:
2018/03/14 22:36:41
|
|
Maxim Begma
:
2018/03/14 22:33:52
|
|
Maxim Begma
:
2018/03/13 1:30:36
|
|
Maxim Begma
:
2018/03/13 1:24:00
|
|
Maxim Begma
:
2018/03/13 1:21:59
|
|
Maxim Begma
:
2018/03/13 1:19:58
|
|
Maxim Begma
:
2018/03/13 1:15:29
|
|
Maxim Begma
:
2018/03/13 1:13:25
|
|
Maxim Begma
:
2018/03/13 1:11:02
|
|
Maxim Begma
:
2018/03/13 1:08:35
|
|
Maxim Begma
:
2018/03/13 1:06:45
|
|
Maxim Begma
:
2018/03/13 1:05:07
|
|
Maxim Begma
:
2018/03/13 1:01:58
|
|
Maxim Begma
:
2018/03/13 0:53:03
|
|
Maxim Begma
:
2018/03/13 0:51:03
My work. The model was purchased from you on pre-order.
|
|
Henry
:
2018/01/31 0:05:25
This model car is not easy to assemble. The decals are so delicated therefore it is very hard to apply ! 1/24 scale is too small...
|
|
No Name
:
2018/01/24 14:40:09
what is his price to Bulgaria?
|
|
Minibike
:
2017/11/08 20:33:00
Tough build but had lot's of fun with building.
|
|
tengel
:
2017/10/29 23:52:00
Great Kit - tamiya qualitiy as usual.
|
|
Pain 1917
:
2017/08/11 8:13:00
This is one of the most beutiful Porsche models. Accurate and proportions of the body and chassis are realy nice. interior is a nice rendering of the car door panels seats, dash board and steering wheels. the weakest parts of this car resides in wheels and tires. Although a good paint job can bring the to life, tires are generic and they are not even closer to the actual ones. Turbo cars have big wheels at front but bigger wheels at rear with possitive offset.
|
|
Pain 1917
:
2017/07/29 4:55:00
I am really disappointed with this product. AOSHIMA actually disrespect those that are buying their products. The model is not even close to the picture of the motorcycle in the box: Major disapointments: Three arm wheels instead of the seven arm that appear in the actual motorcycle. the turn signal lamps are not the square box type used in the actual vehicle The tail lamp is not even close to match the shape of the actual vehicle. This is unfair
|
|
tiara
:
2017/06/02 21:26:00
can i have the assembly manual?
|
|
Anonymous
:
2017/05/26 7:50:00
Releleased print is not cartograf. Printed by japan.
|
|
Anonymous
:
2017/05/17 15:49:00
|
|
bmwracer
:
2017/05/06 3:11:00
Pricey, but awesome, super-detailed kit.
|
|
bmwracer
:
2017/05/06 3:08:00
Looks like the model has no engine... Ugh.
|
|
SubaruAU
:
2017/03/03 22:49:00
Kit takes a lot of work to look good. Fitment of bumpers is bad. Body onto Base also has bad fitment at the front. Difficult to carbon fiber decal the hood as it is part of the body.
|
|
Dong
:
2017/02/27 8:39:00
Too many chrome parts. Others are all good.
|
|
Coby
:
2017/02/06 1:39:00
Overall the kit is pretty good. One small concern is the instructions call for the interior color Ph[b]. This is not clarified anywhere. Ph[a] is clarified on step 1 but Ph[b] is nowhere to be found. also Ph[32] is not on the list of paints needed or clarified as a mix on any steps. However, alittle research was done and i found that the color Ph[32] = field gray.
|
|
Zam
:
2017/01/20 8:48:00
I have a question, is the 3D model coming with the car? thank you
|
|
DKLC
:
2017/01/18 7:59:00
Very disappointing kit! Basically, the kit is a F40 (street version) not F40 LM, the dimension of the body shell is wrong, the interior and engine are both F40 street version layout. Some parts don't fit well.
|
|
Eric
:
2017/01/08 0:31:00
This is an exceptional kit with lots of pieces (149) making it easy to paint in great depth. I goes together perfectly and has some of the most detailed moulds out there. I took this one in a totally different direction using candy lime green and brilliant orange vs red or black. I call it "Shock Factor"
|
|
Dong
:
2016/12/31 17:45:00
A Lot of sanding. Door open should have better joints.
|
|
Kiryl Ahaponka
:
2016/12/26 14:59:00
|
|
Kiryl Ahaponka
:
2016/12/25 14:55:00
|
|
hllun
:
2016/11/27 22:06:00
|
|
Dong
:
2016/11/12 7:01:00
Very good kit! You can refer to real car for painting, which will make your work better.
|
|
Unimog
:
2016/11/12 0:56:00
Big package. Multilingual instructions. Marking and painting guides for 2 versions of the 1985 racer. Clear parts in a separate bag and the rest in the same bag. Bit of flash, minor mold lines and ejector pin marks. 4 rubber tires. Full engine and drive train. Full interior. Opening doors. I added PE windshield wipers, seatbelt buckles and pedals, and Baremetal on Benz emblems, offroad light housings and rearview mirrors.
|
|
No Name
:
2016/11/10 19:51:00
Combiner avec commande 16.1108.2011
|
|
Murphy
:
2016/11/07 10:37:00
|
|
Murphy
:
2016/11/07 10:35:00
|
|
glauco
:
2016/11/01 11:40:00
what Are the Shipping Costs for the " " item, japan to Germany?wolf 1/20
|
|
CJ
:
2016/10/04 5:18:00
I have some items you might be interested in. Your files will not load my pictures. And my descriptions exceed your word limitations. If you're interested please contact by e-mail silverback2978@yahoo.com. Thank you.
|
|
DKLC
:
2016/09/05 21:01:00
Just repack old parts in a new box, not 100% same as in chassis 4846.
|
|
Dong
:
2016/08/30 20:36:00
Agree, chassis paint is not easy (especially the 2 black pipes). The others are very good! I like Tamiya Kits
|
|
Johny
:
2016/08/17 16:14:00
It is very good car a get a lot of information from vin-location.com
|
|
Dong
:
2016/08/11 9:34:00
Nissan officially certified. I have to say this one is better than Tamiya, and also cheaper. Only 2 things I want to point out: 1, what a pain to paint such a small GT-R logo. 2, Chrome plate quality is not so good, I have to remove it from the brake discs.
|
|
Dong
:
2016/07/27 9:51:00
Very good kit, very accurate. Only thing I don't like is that the steering arm is too weak (too thin), You may be break it if you use too much force when you fit the wheels. Pitty, I didn't wax my finished one, but it looks all good.
|
|
none
:
2016/07/22 0:36:00
decal is not cartograf. printed in tamiya.
|
|
Brian
:
2016/07/20 16:42:00
Negative: Lot of holes and sink marks Lots of flash Huge bump on driver's seat. Clear parts are rough with mold lines. Fitting issues Parts remain unused for the kit. (50%) No little chef figure that came with the other kits. No plastic injected bowl of ramen included. (Star Kebab kit came with shawarma meat spit.) The bowl of ramen is advertised on the box art Positive: The decals are amazing. Overall: Simple and cute kit. Recommended for fun.
|
|
Pain1917
:
2016/05/28 7:24:00
This is regular model coming from an old mold from mid 70´s. Then a lot of job removing flashes is required. Despite of that fact, it is feasible to get a nice rendering of a race car chassis, interior, engine and whole car. This relaubched model come with a nice booklet showing pictures of the actual car. Wheels are too small to fit on the Goodyear blue streak racing tires and have a wrong patern. actual tires had holes and not the five slots.Efforts allow to get a nice model.
|
|
DKLC
:
2016/05/23 7:57:00
This is not a brand new model kit, very simple so not much fun to build. The purple color on the decal sheet is too dark totally deviated from the real (even with the box art), this is a big turn down of the kit!
|
|
No Name
:
2016/05/07 7:22:00
Very easy to build & fun kit. Multilingual instructions. Waterslide decals. Simplicity = opportunity for customization. I changed the color scheme, & added DIY PE hood grill & side vents, PE wheel pins, brake discs & windshield wiper & Baremetal.
|
|
No Name
:
2016/04/21 4:13:00
i built the street version of this kit
|
|
No Name
:
2016/04/21 4:08:00
|
|
No Name
:
2016/04/04 15:28:00
Part quality was no match for Tamiya & Hasegawa which makes WRC kits. Photo-etching was perfect. Seatbelts are high quality & required glue. Average fit. Missing 3 antennas. No rearview mirrors, but I used Baremetal. The chassis is quite weighted, compared to any 1/24 ones. Very time-consuming, but fun build.
|
|
No Name
:
2016/04/04 15:19:00
The Belkits was the most complete & complicated race car kit I've ever built. Kit molded in white, clear & black. No chrome-plated headlights & taillights, but I used Baremetal. Official decals. Bundled 6-point seatbelts & tire belt. The tire harness required optional metal rods. 2 PE parts sheets. Instructions were vague. Exhaust pipe required putty & CA. I applied gold & gray carbon fiber decals on dash, seats, door panels & footrest.
|
|
parker
:
2016/03/29 16:22:00
Pretty cool. But the instructions show that it has a motor??? Were the hell is my motor?
|
|
No Name
:
2016/03/21 11:18:00
However, the Audi A4 DTM looks much better than the AMG DTM. The chrome plating was easily rubbed off. The bodywork took a primer, sanding, flat black, sanding, glossy coat, polishing, decals, softener & flat coat. Various metallic colors on the interior & drive train. 2 to 3 times the work of a good car kit, but definitely worth the effort.
|
|
No Name
:
2016/03/21 11:10:00
The AMG Mercedes C-Class DTM 2009 kit was way better than this. Bad fit. Flash & mold lines. Lot of puttying & sanding. Multilingual instructions. Quality pre-cut decals. Step 42 is unclear. The firewall must sit flush with body or the body won't close. I did Baremetal, custom seatbelt, carbon fiber decals, PE windshield wiper & DIY PE front grill.
|
|
No Name
:
2016/03/10 6:45:00
wheels are too small. this is not a well balanced kit
|
|
Porsche 911 GT3R
:
2016/03/08 14:55:00
The kit is awesome. Only missing front wing flaps. Instead of painting the front wing, window frames & side skirts, I applied carbon fiber decals on them. Instead of the 4 chrome-plated hood pins, brake roters & windshield wiper, I used photo-etched ones (ebay). Also, I added a 6-point PE seatbelt + matching decals.
|
|
No Name
:
2016/03/01 0:21:00
This is a kit very simple
|
|
No Name
:
2016/02/29 23:14:00
in my opinion this is not a good kit compared with tamiya. This Is my first Revell kit. doors, boot and bonnet opens
|
|
Lancia 037
:
2016/02/29 14:48:00
|
|
Lancia 037
:
2016/02/29 14:47:00
The visual aesthetics of this cheap & simple kit are fantastic. Quality parts in white, black & clear. Accurate decals. Rub-on tire markings. Metal antenna. Soft rear mud flaps. 2 sets of driver decals. You want #1 Markku Alén & Ilkka Kivimäki who won the rally. Full engine. The only gripe is the missing foot pedals which I scratch-built. Add some PE hood pins, wires/hoses & screws.
|
|
No Name
:
2016/02/29 3:25:00
|
|
hector
:
2016/02/20 23:40:00
|
|
YZF750
:
2016/02/20 10:15:00
Out of the box, the kit is meticulously detailed to the point that even the brake discs holes were factory-drilled. Parts in gray, white, black & clear. Black & clear pipings. Some parts too fragile. Minor mold lines. Tension spring for rear suspension. No screws, nuts & bolts, but a few brass rods for the wheel axises & swing arm (rear fork). Waterslide decals too easy to break. Multi-langual instructions. Good packaging. No part trees scratching against each other.
|