HOBBY SEARCH

List of Customer's postings Model Car Kit    List of Customer's postings - Hobby Search


Dancraft
The Bike looks good, especially the Photo etched wheel spokes..... but where is the chain Fujimi?
2016/02/03 17:59:00

No Name
It looks like Fujimi Mokei is setting the trends: licensed race cars kits & half exposed engines. The actual 6-speed 493 bhp MP4-12C GT3 race car was in 2013 SUPER GT in the GT300 class.

Japanese & English instructions. English color chart. The last color 92 is semi glossy black. Parts molded in clear, white & black. Quality waterslide decals. Photo etched parts. No cloth seatbelts. Metal antennas. No decals for dashboard. The body color is metallic purple.
2015/12/24 10:46:00

No Name
Revell 1:24 Scale Mercedes C-Klasse DTM '09 Paffett. Deutsche Tourenwagen Masters. German touring. The kit is probably the highest quality Revell race car kit. Not very complicated, but enough to show modern engineering. Each tree in a separate bag. No scratching. Multilingual instructions. Minor mold lines, as with every Revell kit. Quality pre-cut decals. The rear fenders were too tight. The bond between the interior & chassis is too loose. The bonnet/hood install was too hard.
2015/12/24 10:07:00

No Name
You can sell my product?
2015/12/23 0:02:00

pain1917
It is a mix of a very easy to assembly model, good quality but unfortunately there are no moveable panels that allow to show both engines, the electrical one and the gasoline one. Gasoline engine is a very nice rendering of the actual thing with the unusual inverted intake and exhaust layout. Electrical engine is very simple. Stronger part of the kit are interior. It is a good kit that properly work can give a great model.
2015/10/13 2:30:59

'Olesmoothie'
I 1st stumbled onto the Fujimi Enthusiast Series of kits by accident. Once I got the kit home and looked inside the box I was HOOKED!!!! I had to own every kit in the series and in fact over time purchased all of them released in the 80's~90's.
In my opinion the 288 GTO is the best looking Ferrari to hit the streets, and this kit captures it's curves accurately. BUT it is a challenge to build but very rewarding when finished right. I spent over 750 hours and 18 months on mine.
2015/10/06 9:07:46

nugundam93
not sure if i got a lemon kit but both the taillamps and headlamps, when fitted, left about close to a 1mm gap between the center of the trunk and front grille respectively. rims are also not accurate.
2015/10/06 2:59:06

nugundam93
decals are a bit thick and they are needed to replicate the advan livery, unless you mask it instead. this is a roadgoing version with the advan decals, unlike the actual racecar with a stripped and caged interior.
2015/10/06 2:54:54

nugundam93
rims included in this kit is not the same as the one on the box cover photo. this is also just a roadgoing version (with complete interior), unlike the actual car which has a stripped interiror and rollcage.
2015/10/06 2:52:54

No Name
Simple box art. Monochrome Japanese & English instructions & color chart. Huge decal sheet & application instructions. Parts in clear, white, black & chrome-plated colors. Minor mold lines. The white body's surface was exceptionally smooth & glossy white. The white panels with the car number behind the front wheels are separate. Minimal masking. No opening bonnet or engine. Bonnect & door vents are supposed to be black. No window masking decals.
2015/09/06 8:36:43

Ai
cool
2015/09/04 15:39:05

DKLC
Haven't start building this kit, but by the glance of the parts I spotted the followings

1. Engine is part of the build in this kit, but the hood cannot be opened.
2. Panel lines are soft.
3. Never see any kits where front bumper is made of brittle clear part.

If you want to build a more decent 1:24 240Z model, I believe Hasegawa is a better choice than Fujimi despite it has no engine detail.
2015/08/25 20:50:45

No Name
The Tamiya version is better in every department except that the Heller kit has a one-piece fairing & fuel-tank-seat-and-tail part & a racing figure with decals. Mold lines everywhere. Fitments weren't good. Decals were too soft & curled up as soon as they left the backing paper. I used putty to fill seams & air bubbles, sanded a lot, primed, airbrushed, touched up, panel-lined, sealed, applied decals, decal solution & softener to, sealed, weathered with Tamiya & sealed the kit.
2015/08/25 6:24:47

No Name
Nice kit but the decals are missing the 3 color stripes that are on both sides the roof over the side glasses.
2015/08/20 1:06:05

No Name
The Tamiya version is better than this one. This kit isn't very detailed. The decals were too thick so they wouldn't stick. Decal softener helped a bit. Had to glue the white strips. Body wouldn't sit flush with chassis. Had to epoxy. The fog lights are too ugly. I changed the colors.
2015/08/10 6:39:17

Pain1917
Side skirts are fit in the air at the extremes. Front and rear bumper fascias fitting can be improved mainly the alignment with the body. Interior looks great specially the fact to build it RHD or LHD. Wheels and tires are beautiful. What I really dislike are those dark smoked glasses for the rear doors quarters and rear hatch they are hiding the beautiful interior. A light smoke color would be enough.
2015/07/28 1:51:49

Pain1917
In the age that Fujimi release for the first time this product they launched several charm products. I looks actually as a auto shop.
2015/07/16 2:45:07

pain1917
Model come from an old tool, actually show the age. Body is a nice rendering. Weakest parts are the racing chassis and instructions sheet. Instructions are not clear when call some of the parts or to indicate assembly position. Wheel base can be adjusted gluing the two halfs in different position, instructions are not clear.Model required more than 80 hrs. to be completed, mainly deburring flashes . Chromed parts have a heavy build up of the clear coat. The final result: Just acceptable.
2015/07/15 6:51:39

андрей
здравствуйте ! хотел узнать когда появится в продаже модель toyota town ace noah ?
2015/06/24 19:23:55

No Name
The photos.
2015/06/22 22:41:08

No Name
It’s my latest Revell 1:24 Formula One kit. Red Bull Racing RB8 Sebastian Vettel. 2012 season. Germany Vettel version. I sanded, primed, airbrushed, sealed, applied decals & decal set to, applied Bare Metal to mirrors, touched up & sealed the kit.
2015/06/11 11:53:00

Isma
Greetings
Is this a ready made fixed model??
2015/05/24 8:09:31

No Name
Although comes from an old tool the product can be completed as a nice rendering of this representative Porsche car. Although roll cage looks a Little bit underscale is a nice representation of this feature. Dashboard, driver sear and chassis require some job but final result worth it. The weakest part from my personal point of view are the tires.
2015/05/08 6:57:29

JJ
Have been stuck with this kit for quite some time. Instructions, I think are not the updated version some help with that would be great.
Thanks
2015/04/26 0:53:34

chocolatecheesecake
@oldtoni: hey dude, this isn't a place to make requests for your orders. You should contact the HS staff directly by email for order request.
2015/01/26 9:49:47

oldtoni
I would buy also De Tomaso Pantera GTS (Model Car), you can add this item to [Order No.] 15-0123-1448?
thank you
2015/01/25 12:05:42

that+annoying+blonde
if you know about it, can you post?
2015/01/04 6:41:13

that annoying blonde
it was fun to put together, even though i have a piece that has no number and the instructions have to pictures of it even though it i there
2015/01/04 6:40:04

Mosab
mosab_q2222@hotmail.com
i want to ask if you ship to israel
2014/12/14 8:41:47

No Name
The kit is a 1/24 scale of the 2010 Formula One season race car. Excellent box art. Very clear instructions. The body mold lines were wet sanded away. The antenna in front of cockpit was scratch-built. The tires were sanded to a worn look. Plenty of carbon-fibre decals on the chassis, suspensions, and cockpit. A few version. My photos show the Fernando Alonso.
2014/12/11 10:49:05

pain1917
This is nice rendering of the 911 turbo, Some minor details in the engine that can be fixed to provide a good looking one. Rear suspension is a weak one since the control arms look smaller than they must appear. Body is a well proportioned one and from my personal point of view this kit has the most beautiful rendering of the front seats. Rest of the parts looks accurate giving a nice model as a final results. probably the weakest parts are wheels and tires.
2014/12/08 9:24:42

Genji92
I bought this model for my girlfriend because she loves Trabants but I had a hard time putting it all together. Some of the parts looked different on the manual, that was the most frustrating part, also some of them just didn't seem to fit together, but most of it was alright. Definitely not as good as the Tamiya models.
2014/09/18 23:42:23

Genji92
This model looks just like the real thing but I had a hard time building it. Some of the parts looked different on the manual, some of them didn't fit properly but most of all the front wheels don't fit at all, so I had to glue them to keep them in place.
2014/09/18 23:40:10

Anon
What's the difference between this and the Fuji Rd.2 Winner ver.?
2014/08/11 22:37:50

cri
I noticed that although the kit comes with two different set of rims, none is the one pictured in the box
2014/04/20 0:48:38

cri
Nice kit accurately molded and very detailed. It comes with many choices:
- 2 sets of different rims
- 3 choices for rearview mirrors
- 2 types of rear spoiler
2014/04/12 19:25:59

pain1917
This new series of wheels are a complete deception. The are not even close to be a model accesory, they look more like a fantasy toy. Unfortunately is more expensive send them back to Japan than through them away
2014/04/03 6:43:12

No Name
really no engine
2014/03/07 18:25:42

No Name
Builds into a very nice model. Easy kit to assemble and paint, highly recommended..
2014/01/17 9:10:28

No Name
One of the most beutiful models from Fujimi. Despite of its curbside condition the model shows a great underfloor detail good enough to compite with more intrincate models. But what is actually the nicest part of the car are those beutiful door panels and the body. Both replicate in al detail the actual car.
2013/09/23 23:13:13

Pain1917
Model quality is really poor. First issue just had a revised version of the body but used the chassis/interior of the F348 model which had an accepatable interior with separate door panels. Revised version is really UGLY. very bad quality do not match with the traditional quality of a Japanese product. I found toys with better appearance than this supposed to be an accurate model.
2013/09/18 7:49:47

GeeTee66
Excellent chrome
Tyre tread pattern is very good with only tiny seams which can be easily removed.
Sidewall lettering is true-to-scale and very crisp.
The addition of the scooter is a bit of fun, too!
2013/07/29 20:34:21

omeser
Why you posted a picture with work meister .
and sell packs with that sh...?!
2013/07/29 2:47:20

Chrisswiss
Aoshima were the only ones who offered decent H-D models in a time when the Harley Davidson Company let only Franklin Mint reproduce their bikes. Now Tamiya has started to make their models again, but the Aoshima range is still great! The models are easy to build and look very realistic.
2013/07/25 3:50:56

ray886
Car height needs little bit lower......
2013/05/27 1:52:35

ray886
Cockpit is nightmare........
2013/05/27 1:40:46

No Name
I have had this model for many years just starting to put together and looking through parts i`m missing the red tail light lens for rear section of car need very bad is there any way i can order this part, please e-mail back @ rcara22@hotmail.com, my name is Bob
Thanks, RC.
2013/05/07 12:18:02

Mannix
Nice kit easy to build.
2013/04/21 15:14:05

enzo
really nice btu the doors arnt as nice but the best car model you will find
2013/04/19 7:28:22

Chris from Teesside
Hello, I am from Great Britain, and I purchased one of these model buses as long ago as 1990. I built it whilst I was staying in a bed sit. I still have the model and I will try and send some pictures soon. I did make one change to it. I painted the model in the livery of my local operator rather than in the yellow as shown on the box.
2013/03/25 6:37:22

ASK
Why are the best models discontinued Tamiya and Aoshima could learn something from Nichimo
2013/03/12 3:55:23

ASK
You need more of these
2013/03/12 3:46:46

Lumpy
Easy to build but low quality.
2013/01/26 20:42:15

mr.Prawit
like ls600 hl HYBRID SEDAN V8 4,969 cc a8 gear 445 PS LOVE LEXUS LS600hl THIS MY CAR AWD
2013/01/04 2:27:04

No Name
like ls600 hl
2013/01/04 2:22:21

Sergey
hello! I have ordered delivery to Ukraine, Kyiv, and make payment webmoney?
2012/12/21 6:35:00

Villanova
nice and easy to build kit. But unfortunatly iot very accrate especially as the car representing the Belgian GP. Front wing and radiators are very wrong. Front suspension for this race was also changed as some more supports were introduced in the wake of a serios crash by pironi at Paul Ricard. As with all 126C2's from Fujimi the shape of the nose and tire size are also wrong.
2012/08/15 21:19:24

LIEW
Hi this price include the post ?
2012/08/09 19:45:06

sampie
my car in the netherlands,europe
2012/08/08 6:34:18

sampie
my car in the Netherlands europe.
2012/08/08 6:33:03

Silversyrup
A nice model....
But the FRTR decals are the wrong size !!
They are too big.
So the finished bike will not look right :(
I hope that Fujimi will offer replacement decals....
2012/05/06 20:43:08


alvin
Another nice stuff from Shunko.
I painted mine with Tamiya Spray TS36, TS34, and TS22 as they were easier to obtain locally. :p
2012/04/01 14:56:32

sham
very nice decal !!!
2012/03/10 15:01:58

MC
Fujimi is joking with us???? What a mess of the door hinge, if there IS any hinge! And also the engine hood. It is as expensive as some latest TAMIYA ones, but the quality and sincerity is far lower. Fujimi is ruining its own reputation AGAIN (remember the over-simplified interior of 458 italia? ) i cannot trust Fujimi any more :(
2012/01/17 0:05:27

alvin
It's a nice set of decal which gives my 10+ years old EG6 a new life. Decals are with glossy finish. They are strong and can get over edges without problems. :)
2012/01/01 0:34:01

recent purchase
incorrect placement of the gas filler cap. actual 6 ranchero has only on and it is on the left side of the truck. not both sides.
2011/11/15 13:35:14

B3rnardo
I have to comment that all the kits under the Celsior UCF 31 have the problem that the pieces comes very tight on the box and the body tends to get warped and broken easily. After that is a great kit.
2011/07/31 13:26:23

Ken O
I built this model years ago. The only real reason for this posting is to say that the illustration is correct for recent examples of the FX-4. Originally, they had to be black by law, but in about 1985 the law was relaxed to allow maroon (Humbrol 10) or dark blue (Humbrol 13) as alternative body colours, and has since been relaxed further.
2011/06/14 23:06:54

No Name
Excellent kit. Good quality parts. But NO english instructions so i can't paint the model first and then build it. Such a shame. It looks really good to do.
2011/05/27 11:07:23

murphy
Cute!!
2011/04/11 18:40:21

murphy
It's just for fun.
2011/04/11 18:26:17

No Name
GREAT DETAIL AND VERY GOOD QUALITY MODEL
2011/03/19 3:10:29

Driunia
Model purchased from Hobby Search. Seller is not in any claims. A manufacturer's packaging is not damaged, came very well packed. The seller will not have the details, but nobody at the factory to send :(.
2011/02/19 2:49:00

No Name
If it's not floating around in the packaging, contact whoever you bought it from.
2011/02/18 10:05:50

Driunia
Factory waster! Pack a lack of a tail lamp. Original sealed packaging, and tail lamp missing.
2011/02/18 5:09:15

Jasmine
could you please tell me roughly the estimate prize for the engine, I have the exact same care and same colour but I think I need the engine replaced, so if you could jst help me owt and sort of give me an idea where and how much does the engine cozt.

by the way Im living in NZ @the moment.
2011/02/14 10:55:46

alvin
It's easy to assemble. The adjustable ride-height is impressive. The decal requires some patience to fit on. It's my first itasha after all.
2011/01/08 16:24:02

Madish
The thread and pattern and also the size of the tires fits to large scale of 1980 F1 models. I have used them for example on Ferrari 126 CK 1:20 without any problems.
2010/12/22 2:43:05

haruhi7
This is a mid 80's Peterbilt 359 one of the air cleaner tanks are painted. This tractor looks good painted green. thats what i did! ^_^
2010/12/15 9:00:52

haruhi7
This will look good with the Freightliner COE tractor
2010/12/15 2:06:54

haruhi7
I have 3 of these kits. the sleeper cab has 2 holes on top to put the high roof air faring on. If you want a flattop sleeper just get some model putty and fill in the holes. then paint the whole cab and you have a Kenworth t600 flattop sleeper! ^_^
2010/12/15 2:05:11

haruhi7
ooh, nice tractor trailer! ^_^
2010/12/14 12:13:12

haruhi trucker
I have this kit. Its a early 80's White Freightliner COE tractor. When put together and painted the right colors it is beautiful. I am a big fan of Freightliner COE's and this kit is great for me!
2010/12/07 12:29:13

FireStone
Amazing model!
2010/12/06 16:53:00

kaefergarage
Nice and easy to build. For beginners definitely a good choice. To rise the skill you could try the Tamiya Beetle.
2010/11/17 6:55:58

kaefergarage
Like the hatchback is this model kit useful to start the modelling. It's pretty easy to build and doesn't look cheap.
2010/11/17 6:53:46

kaefergarage
A model kit definitely for beginners. Not that much on parts, no engine to build. But looks nice in the shelf :)
2010/11/17 6:51:54

kaefergarage
One of less model kits with side mirrors. Easy to build, the parts fitting very well together and the model kit looks pretty nice. The detailing of the engine and interieur are very good.
2010/11/17 6:45:47

tengel
Some testshot pictures
2010/10/26 16:36:02

kamal
i need some car
2010/08/02 5:17:18

Emp-Modeler
The Honda S800 and The Doyusha Experience!
Undoubtedly, this is one of the most emblematic cars from Japan. Doyusha reissued the kit, which was originally from Otaki. They could take the reissue of the kit and add some improvements. Not so. However, after several hours of fun, lots of work in scratch and see many photos of the original model, the final result is very rewarding. It is not an easy model, but I had fun and that's the most important thing in this wonderful hobby.
2010/06/12 1:59:25

My Vickers
Fantastic kit, very nicely detailed, etched parts make it really nice.
2010/05/28 10:42:00

smbrm
Looks like a good decal, however they did not get the large Shell emblems quite right! The upper part appears to be squeezed and too narrow.
2010/04/27 0:18:47

cceagle
This is a nice model!
2010/01/22 17:21:10

195 Posts ( show 101-195 )