- Compared to the conventional rail products, new Tomix rail in pursuit of ease of use and compactness of appearance
Is [Fine track]. Rail standard, lineup inherited the conventional ones of rail products,
I have been realized fully compatible.
- Note on the fine track handling
1, detachable rail please go to the horizontal. Please note that you do not or twist. Unreasonable angle of
When you repeat the pull and plug, it can damage the rail tip such as Joyner.
2, Please make sure before you drive rails are securely connected. If the connected rail
If there are steps to each other, not only vehicle derailed, it will be damage quickly the rail.
3, to feed the electricity from the power unit to the rail, use a dedicated DC feeder N
Please.
4, in order to keep the energizing function of the rail well, frequently all of the rail (sold separately) <6401> rail
After polished in such cleaner, wipe. Especially careful not to put such as oil.
5, because the ballast (base portion) is made of ABS resin, where the hit is a hot place (direct sunlight, heating appliances
Do not leave the close, etc.). There is a possibility that deformation. In addition, the chemicals such as thinner
Please note also.
※ The color of the rail ballast There are coating method on the rose with. Please understand.
- About Joiner
1, to connect the rail, by adjusting the orientation of the joiner in a horizontal (or slightly upward acceleration)
Please.
2, If Joyner is out, should be installed with caution in the direction of the Joyner. Pointed part
Please note that no personal injury on such.
※ <6005> Joiner repair (sold separately) Do not use absolutely. I damage the Joiner part
It may cause.
( This is a machine translation. Please allow for possible misinterpretations in the text. )