Fine Track Curved Track C354-45 (F) (Set of 2) (Model Train) - HobbySearch Model Train N Store

This item is limited to 50 per household.

Sorry. As for this article, production was canceled. Therefore I can sell only what in stock to you.
See Fine Track Curved Tracks C354-45 (F) (Set of 4) (Renewaled Product) also.

[ Recommeded Items ]
- Fine Track Tracks Set
- Fine Track Tracks
- Overhead Wire Mast for Singel Track (Modern Type/Set of 12)
- Overhead Wire Mast for Double Tracks (Modern-Type/Set of 6)
- Overhead Wire Mast for 3 Tracks (Modern Type/Set of 3)
- Overhead Wire Mast for 4 Tracks (Modern Type/Set of 3)
- Overhead Wire Mast for Single Tracks (Steel Frame Type/Set of 24)
- Overhead Wire Mast for Double Tracks (Steel Frame Type/Set of 24)
- Overhead Wire Mast for Double Tracks with Multi-length Truss Beams (Set of 12)
- Overhead Wire Mast for Double Tracks (Pipe Type / Set of 24)

[ Optional Parts ]
- D.C. Feeder N
- TCS Touch Sensor Plug in Type
- Noise Canceller Treadboard Type (Set of 2)
- Insulating Joiner (F) (Set of 20)

[What is the fine track ...]
- Compared to the conventional rail products, a new Tomix rail in pursuit of compactness and ease of use of appearance
Is [Fine track]. Rail standard, lineup inherits those of the conventional rail products,
It has achieved full compatibility.

[Products Guide]
- At the rail of the underlying fine track, it is a group of the curve rail which corresponds to the curved portion.
- Curve rail in the center of the rail with a radius of 280mm and 317mm, which can circle and connect the eight consists of the radius 37mm increments of rail.

[Characteristic]
- Painted the ballast and sleepers, beautiful appearance
- Wooden sleepers representation
- Rail each other coupled with the snap with a nail, a simple reliable connection
- There is connection-compatible with conventional TOMIX rail

[option]
- Joyner: <0110>
- Gap Joyner: <0111>
- Tread type direction indication LED: <0112>

[Note on the fine track handling]
1, rail detachable, please go to the horizontal. Please note that you do not twist or. In unreasonable angle
If you repeatedly pull and plug, you will damage the rail tip such as Joyner.
2, Please make sure rail is securely connected before operating. If the connected rail
If there is a difference in level between, not only the vehicle is derailed, it will damage the rail early.
3, if you want to feed the electricity from the power unit to the rail, you are using a dedicated DC feeder N
Please.
4, in order to keep the current function of the rail well, frequently all of the rail (sold separately) <6401> rail
After polished with such cleaner, please wipe. In particular, take care not to cause such as oil.
5, because the ballast (the base portion) is made of ABS resin, where the hits are hot places (direct sunlight, heating appliances
Please do not leave in the vicinity, etc.). There is likely to be deformed. In addition, the chemicals such as thinner
Please be careful.

※ The color of the rail track bed has a coating method on the variation. please note that.

- About Joyner
1, if you want to connect a rail, by adjusting the orientation of the joiner in a horizontal (or slightly upward acceleration)
Please.
2, If Joyner is out, make sure the direction of Joyner. Pointed part
Please note that there is no such injuries and the like.

※ <6005> Joyner repair (sold separately) Do not use absolutely. Damage to the Joyner part
Cause.

Item Size/Weight : 37 x 9 x 0.8 cm / 60g