Product Description
[Products Guide]
- Relay error rail is placed on rail wheels were Datsuwa, it is a rail with Rirera function.
- It is realistic appearance to resemble the wooden treads line on the real thing.
[Characteristic]
- In Datsuwa the recoverable rail wheels, length 140mm
- Included slope parts
- Multi-line support by a spacer parts
- It can be installed on the side of the station home
- Built-in possible in a single line elevated HS140 by the replacement of rail
- Built-in possible to double track girder bridge
- Built-in possible through girder bridge
- Feeder two places can be attached
- Straight Rail S140 (F) with a single
- Painted the ballast and sleepers, beautiful appearance
- No wood grain wooden sleepers representation
- Rail each other coupled with the snap with a nail, a simple reliable connection
- The Joiner improvement Joiner use
- There is connection-compatible with conventional TOMIX rail
[set content]
- Relay error rail S140-RE (F) 1 this ×
- One spacer parts ×
- Two slope parts ×
- Straight Rail S140 (F) 1 this ×
[Fine Track and (fine track) ...]
- Pursuing realistic, ease of use!
- Superb system of is Tomix rail series has been developed as it is.
- You can also connect with the conventional Tomix rail.
- Compared to the conventional rail product, it is a new Tomix rail in pursuit of compactness and ease of use of the appearance [Fine track]. Rail standards, the lineup will inherit those of the conventional rail product, it has achieved full compatibility.
- Note on the fine track handling
1, rail detachable, please go to the horizontal. Please note that you do not twist or. If you repeatedly pull out and plug in the excessive angle, it will damage the rail tip such as Joyner.
2, Please make sure rail is securely connected before operating. If the there is a step in the rail with each other that are connected, not only the vehicle is derailed, it will damage faster rail.
3, if you want to feed the electricity from the power unit to the rail, please use the dedicated DC feeder N.
4, in order to keep the current function of the rail well, after the polished diligently all of the rail in such as <6401> rail cleaner (sold separately), please wipe. In particular, take care not to cause such as oil.
5, because the ballast (the base portion) is made of ABS resin, (where the direct sunlight, close to, such as heating appliances) hot places Do not leave. There is likely to be deformed. In addition, you should also be careful to chemicals such as paint thinner.
※ The color of the rail track bed has a coating method on the variation. please note that.
- About Joyner
1, if you want to connect the rail, adjust the orientation of the joiner in a horizontal (or slightly upward acceleration).
2, If Joyner is out, make sure the direction of Joyner. Please note that there is no such injuries in such sharp edges.
※ <6005> Joyner repair (sold separately) Do not use absolutely. It will cause damage to the Joyner part.
[Specification change information]
- From 2016 re-production run, the package has been changed from the blister type in paper box type. For a while might be old and new packages are mixed. Please note.
( This is a machine translation. Please allow for possible misinterpretations in the text. )
Item Size/Weight : 18 x 5.7 x 2.8 cm / 39g
Product Specifications
- Item code
- 1523
- JAN code
- 4904810015239
Purchase Information
This item is limited to 39 per household.