<Product Features>
- Pay Jumper plugs of this type, whether it is molded by being simplified to a body of the vehicle so far,
Was not only expensive lost wax products, but the structure and form of the real thing as much as possible
In view of the split mold to close, as well as obscure parting line,
An attempt was made to separate parts arm tightening.
<I pay attention here!>
- Band to another part of the tightening, accurately reproduce the image of the real thing.
I can be installed in any position either the top, bottom of the band.
- Troublesome finish work is unnecessary position of the parting line is not noticeable.
- Material because it is made of ABS, I'm getting hard to compromise and also thin jumper wire portion.
- The intended use: I reproduce the pay jumper plug] is installed first car of the train, and electrical locomotive
Parts.
- The primary use series: JNR 103,113,169,201 (prototype), 485 Series (併結-cars), Seibu E31 · E851,
Kobe Electric Railway, Nishitetsu other
- Material: - (tagged 20 × 40 × 87mm, for hanging of) clear pack package ABS
- Assembly method: is fitted in the recess of the body paid jumper plug the arm tightening, adhesive poured a small amount of
In I and secure.
- How to use: a hole of φ0.6mm the mounting portion of the body, through the mounting foot of the product there
And glue and fixed.
- Adhesion, for paint: I can use adhesive pouring, plastic coatings.
( This is a machine translation. Please allow for possible misinterpretations in the text. )