Product Description
- New release second edition cab back parts for various locomotive! !
- Locomotive who are leading the various trains, a variety of activity.
- Indoor cab back parts to reproduce the brave figure in more feeling basis will be released new.
- Installation is easy and safe.
- You can reproduce the back equipment as seen from the front just stick to the light-shielding parts.
- Parts will have been cut by a laser, it is likely to stick.
- Please make the means your existing grade-up of the vehicle.
- Contents: EF66 cab · EF81 cab · ED76 cab each 1 輛
※ In the case of [Goodbye set], for No.10296 ED76 is required.
- Was stuck Tsukekata:
<EF66>
(1) Remove the cab of the parts by removing the exceeding of each locomotive.
(2) seal and peel off carefully, and stick it on the part surface.
(3) it will return the beam finished the parts to the original position. So we have to make divided at the 1-position side and the second place side, please be careful in mounting. (If you are shoulder louver is the # 1 side)
(4) This is a complete re-assembled to restore.
<EF81>
(1) Remove the cab of the parts by removing the exceeding of each locomotive.
(2) seal and peel off carefully, and stick it on the part surface.
(3) it will return the beam finished the parts to the original position. So we have to make divided at the 1-position side and the second place side, please be careful in mounting. (Is shorter high-voltage line is the first place side)
(4) This is a complete re-assembled to restore.
※ In the case of the former power (light-shielding parts silver), it will cut a line portion of the seal parts. Paste it into the light shielding parts from the roof.
<ED76>
(1) Remove the cab of the parts by removing the exceeding of each locomotive.
(2) seal and peel off carefully, and stick it on the part surface.
(3) it will return the beam finished the parts to the original position. So we have to make divided at the 1-position side and the second place side, please be careful in mounting.
(4) This is a complete re-assembled to restore.
- Use Material: resin adhesive sheet
※ We have produced a vehicle to reference but there is a part that is different from the actual vehicle.
※ damage such responsibility at the time of processing is I can not assume. Please note.
( This is a machine translation. Please allow for possible misinterpretations in the text. )
Item Size/Weight : 12.4 x 7 x 0.4 cm / 4g
Product Specifications
- Item code
- 10299
- JAN code
- 4582342842990
Purchase Information
This item is limited to 3 per household.