Product Description
- New release KIHA 82-based interior parts for KATO HO! !
- Kiha 82 series that became the driving force behind the improved speed and comfort of the non-electrified section.
- Newly set the grade up parts will be new release.
- Ordinary car, seat cover for green cars, dining car tablecloth representation expressed in fabric.
- Indoor partition such as a combination of acrylic material and cutting sheet, pursued the vehicle of the atmosphere.
- Please make the means your existing grade-up of the vehicle.
- Contents:
-Seat parts
·table cloth
-Wall parts
- Indoor partition plate parts
- Note: Please be sure to clean the target part is attached to before the paste. There is a possibility to come to peel off after mounting by a release agent, and the like remain. When it is painted, there is a risk that peeling is also painted upon reattachment together.
※ one point: if before interior construction paint the product of indoor parts in gray, it is recommended it will be close to the actual vehicle representation.
※ We have produced a vehicle to reference, but there is a part that is different from the actual vehicle. Also, like responsibility we can not assume damage during processing. Please note.
- Materials used: acrylic, cutting sheet, cloth
※ cutting sheet, (Ltd.) is a registered trademark of Nakagawa Chemical.
[Attaching]
- [A] aisle seal
The seal, which is cutting of a I will peel off from the mount. So that it sticks to match the lower side to the portion of the passage of the interior parts. Please firmly contact is allowed Once the location is decided.
- [B] audience Parts
It will peel off the seal that has been cut from the mount. Please stick to the seat portion.
- [C] table cloth parts
We will put it toward the center of the window side of the table as a reference. Please refer to the mounting swatches folding corner.
- [D] counter lower seal
It will peel off the seal that has been cut from the mount. Please stick to the counter lower portion.
- [Ae, F, E] room partition parts
F is peeled off the curing paper of acrylic parts, you stick ahead to the door parts of E in accordance with the cutting line of F. Ae, please paste on both sides. Please paste in When you are finished paste rubber-based adhesive.
Please do not use instant adhesive ※.
- [F, b, c] aisle partition parts
F of I will peel off the paper curing of acrylic parts. Previously along the cutting line of F and then cut with a cutter or the like. Also, it will cut the same door portion of the Ac. Ab, you will double-sided paste the c to the portrait of parts. The square of the parts it will paste the parts of the Ac. Please paste in When you are finished paste rubber-based adhesive. Please position of door parts to the installation image to the reference.
Please do not use instant adhesive ※.
( This is a machine translation. Please allow for possible misinterpretations in the text. )
Item Size/Weight : 16 x 10 x 0.5 cm / 10g
Product Specifications
- Item code
- 10862
- JAN code
- 4582342848626
Purchase Information
This item is limited to 50 per household.