- Two light sensors, is a movement with a two motor to program your own [light sensor programming car].
- The movement of the program, install the software [IconWorks] to the PC, you can create a simple operation of only arrange the icon. ※ manufacturer home page reference
- Since the mounting position of the sensor can be easily changed, the floor detection car be attached to release the sensor downward, in line trace car to detect the line if brought closer, also to the obstacle detection car If you attach the sensor to positive can do.
You can enjoy a wide range of control in the ingenuity of the program and the sensor mounting position.
- Use battery: single 3x3 (not included / alkaline batteries recommended)
- Current consumption: Operating average 150mA
- Accessories and sensors: light sensor
- Accessories: program transfer cable
- Power: DC motor two
- Difficulty 4
- Work time: 3 to about 4 hours
- Age 12 years of age or older.
- The number of parts 46 points
- Tools required: driver (plus), nippers, pliers, soldering iron
※ It is a semi-finished product specifications. (90% of the parts have been soldered)
※ soldering practice board containing
( This is a machine translation. Please allow for possible misinterpretations in the text. )