- For making various models !!
- It is a cork mat which is easy to use size suitable for the production of ground and road etc. because it can freely bend.
- It is easy to use, 2 mm thick cork mat ideal for the production of the railroad model, diorama, architectural model, various model grounds and roads.
- Easy processing such as cutting, bending, bonding, etc. with natural materials as raw material. Depending on the idea, it can be used for various purposes.
[How to make a whirlpool using cork mat (field preparation reference example)]
- What to prepare: In addition to the necessary tools / supplies stated on the mount, prepare separately materials such as scenery materials (scenery powder, ground cover, field sheet) released from Tsugawa Yoko.
(1) Draw a section of the field with a pencil etc on the base board. Following the parcel, write a wayway between the field and the field. Cut the cork mats according to the drafts of the morning avenue, and paste it on the draft with glue to make a way for a way.
* The field can temporarily set the direction to hit the sun and arrange it and create landscape with no contradiction. Also, the section of the field looks better when finely cut.
(2) At the stage when the adhesive of the pathway dries it makes a pattern of the field. Place copy paper etc on the section of the field and copy the contour. Decide the block number and write a number on the pattern paper (4) work easier.
(3) Finish the morning avenue before sticking the vineyards. I paint adhesive on the way road and scatter scenery powder suitable for the color of the road.
※ Please use woodworking bond etc. for adhesion of powder.
(4) Cut the field sheet according to the paper pattern prepared in (2). While paying attention to the balance of color and pattern, finishing it realistically if you paste several kinds of field sheets like patchwork.
* Please use woodworking bond / spray glue etc. for adhesion of the field sheet.
(5) Finally, in order to give the feeling of weeds on the side of the road, paint the adhesive between the field and the roadway and scatter the scenery powder and the ground cover and complete it.
※ Because of natural materials, there are differences in eye detail and warpage.
There are some variations in dimensions due to cutting circumstances ※.
* Please be careful when sticking the cork mat directly to foam polystyrene when spraying paste, solvent type adhesive such as rubber type adhesive dissolves and deforms foamed polystyrene.
※ Please pay attention to the use of the tool carefully so as not to injured.
[Required tools / supplies]
- Tools: Scissors, Cutter knife
- Adhesion: woodworking bond, rubber type adhesive, double sided tape, spray glue
* Please use tools and various supplies according to the instruction manual of each product.
※ Please purchase tools and supplies separately.
[Size / number of entries]
- Size: about 120 mm × 220 mm × 2 mm
- Number of entrants: 2
- Product Material: Cork
- Target age: 12 years and over
- Size: 120 mm × 220 mm × 2 mm
( This is a machine translation. Please allow for possible misinterpretations in the text. )