- Everything soldered and set safe!
- Spark base, LED, current collector are already soldered.
- It can be used just by incorporating it in a vehicle.
* For TOMIX vehicles and electric locomotives, solder processing is necessary.
[set content]
- 1005 LED light harness
- Main body base
- Current collector
[Major Changes from Ver.2]
- Spark starts from slower speed.
- Brightness at the start of spark was improved.
- Spark gap adjustment function Discontinued.
[Condition of spark]
- Steady lighting: Start from when stopped
- Running: Starting from driving time
* It depends on the vehicle etc.
* Spark may be different depending on specifications.
[Type of spark]
- Intermittent: occasionally violently spark
- Continuous: a small spark followed
- Transcendence: Really spark
[Spark direction]
- Both directions: both up and down
- One way: Only uplink or downlink
- The one way type sparks by the direction of travel (polarity).
* In Ver.3, the spark turns ON or OFF for both LED1 and LED2.
( This is a machine translation. Please allow for possible misinterpretations in the text. )