-I reproduced the side bag that Rin uses.
-Can be used by connecting two with a dedicated belt (attachment).
-Connect the units together so that they can be used on bicycles. ※ [Please use a bicycle with a carrier.
-The body is made of water resistant enamel material.
-It is a full-fledged specification such as a water blocking fastener and a bottom hook.
-You can use it as a shoulder bag if you use the included belt for easy portability.
-The print is casually designed as a sticker on the icon logo of [YURUCAMP-] and Rin of the bike. Ideal for traveling companions.
-Two large pockets and two small pockets containing CP in the main compartment. You can use it as it is with ON or OFF.
-Reflector fabric is used on both sides of the body. It enhances nighttime visibility and safety.
[size]
-Body: about W 36 x H 27 x D 14 cm
-Out pocket: about W36 × H22 × D3 cm
-Shoulder belt: 74 to 130 cm in length
-Attachment: Size: about 18 x 26 to 31 cm
-Body material: Enamel, water stop fastener, reflector, nylon tape
-Attachment material: nylon
[Set Products / Accessories]
-Body (side back) × 2
-Supplied shoulder belt x 2 pieces
-Dedicated belt for connection (Attachment) x 1
[specification]
-Opening and closing: W fastener
-Pocket
・ Main compartment inside
・ Open pocket × 2
・ Outside pocket inside
・ Mesh pocket × 2
※ This product is a side bag that faithfully reproduces the original.
※ Moped bike (less than 50cc) Bicycle, it becomes a planning product on the assumption that it is attached to a road bike.
※ Please attach after carefully considering attachment to the bike.
※ When the bike is installed, the maximum loading weight of the body: 2 kg
-When using single item
※ Please pay attention to motorcycles, road bikes and regular bicycle driving with the side bag on top and in compliance with the road traffic law.
( This is a machine translation. Please allow for possible misinterpretations in the text. )