[C006 automatic reciprocating operation switch specifications]
--RC-02 / RC-03 This switch is exclusively for train controllers and automatically turns back by a sensor to perform reciprocating operation.
-Decelerates and stops when the vehicle passes over the [Narrow Sensor Cable]. I will turn around.
--The included [Narrow Sensor Cable] is used by attaching it to the power supply section of the straight rail, just like the [Narrow Feeder Cable].
-The cable length of [Narrow sensor cable] is 70 cm.
--You can switch between automatic reciprocating operation and manual operation with the ON / OFF switch.
――By partially processing the inside, you can change the settings of acceleration time, deceleration time, and stop time. (For advanced users)
--Can be used with either Z gauge or Z shorty.
--It is possible to connect existing switches such as C002 / C003 / C004 using the side hook.
[Contents]
--Automatic reciprocating operation switch x 1
--Narrow sensor cable x 2
--Narrow feeder cable x 1
--Instruction manual x 1
* Because it uses an optical sensor, you cannot play in places where direct sunlight or natural light from the outside enters. It is necessary to devise the room and layout to drive.
* In automatic reciprocating operation, it is not always lit. Lights are turned off while the vehicle is stopped.
( This is a machine translation. Please allow for possible misinterpretations in the text. )