Lamborghini Aventador SVJ 63 Roadster 2019 Candy Red (Diecast Car) - HobbySearch Diecast Car Store

This item is limited to 1 per household.

-It is [Lamborghini Aventador SVJ 63 Roadster 2019] produced as a 1/18 scale handmade model car of [EIDOLON].
--This model faithfully reproduces the [Aventador SVJ 63 Roadster] released as a special specification of the [Aventador SVJ Roadster] released as a high-performance limited model of Lamborghini.

[Vehicle commentary]
--Lamborghini announced the Aventador SVJ Roadster at the [Geneva Motor Show] in March 2019.
--This is a model in which the Aventador SVJ with a coupe body has been changed to an open top body.
――The engine, which boasts a maximum output of 770 horsepower like the coupe, has a maximum speed of 350 Km / h or more.
――The interior, which has the image of an aircraft, is mainly composed of carbon material for weight reduction and the skin of Alcantara, so you can enjoy beautiful contrast.
――In Lamborghini, which was founded in 1963, [63] has a special meaning.
――This [Aventador SVJ 63] is a special color combination that is applied to only 63 out of 900 units.
――Visible carbon is added to the roof and engine hood, and color stripes are added to the front spoiler, side skirt, and rear bumper.

[Model explanation]
――As a Make Up that focuses on modeling modern-day Lamborghini, the car with the SVJ subname, which has a special meaning for Lamborghini cars, must be released not only on 1/43 but also on 1/18. did.
――The prototype is designed based on the 3D data provided by Lamborghini, aiming for objective proportion modeling.
--The air intake outlets provided throughout the body reproduce the deep digging that seems to push the limits of resin casting and molding, regardless of the cross-sectional shape.
――The mesh grill around the exhaust end is pressed on the etched parts to achieve a three-dimensional shape.
――If you look into the rear bumper outlet, you should be able to confirm the existence of the oil cooler just like a real car.
――We were particular about the thin and sharp modeling of the aero devices that make up ALA 2.0, such as the aircraft parts that are characteristic of SVJ.
-The wheel reproduces the Raylion type with different front and rear diameters (F20 / R21) with a sharp mold.
――Because it is an open top model, you can fully enjoy the precisely reproduced interior.
--Carbon decals are attached to the roof panel that is reproduced as a separate part.
――All variations reproduce the appearance of the carbon package attached to the exterior.
――The carbon package has a carbon finish on the bonnet duct, side wind duct, side mirrors, and side skirts.

--EML030A: Matte gray (limited to 80 units)
--EML030B: Candy Red (Limited to 63 units)
--EML030C: Blue Uranus (limited to 63 units)
--EML030D: Verdei Saka (Limited to 63 units)
--EML030E: Black (Limited to 63 units)

--Material: Resin body, white metal parts, etched parts, aluminum sawn parts
--Pedestal, clear cover, silicone cloth included