――Since the concentration density of the surface is high, it is very useful when you want to cut deburring finish cutting, correction, grinding, and cutting multiple square radius with the same dimensions.
--Can be used for cutting materials such as resin, carbon resin, cemented carbide, hardened steel, ceramics, glass, tile, reinforced plastic, and stainless steel.
--Since the diamond abrasive grains are firmly held by the file base, the initial sharpness is maintained until the end.
――It will be easier to use when used in combination with Pin Vise.
――If you get clogged, use a toothbrush to remove the sharpening powder, and the cut will be restored.
—— Applications: Plastic models, model railroads, RC, figures, dollhouses, etc.
--Material: Diamond grain bond by nickel electrodeposition to carbon tool steel.
[What is a diamond file? ]
――It is a file in which artificial diamond grains are bonded to the surface of the file by a plating method (nickel electrodeposition method) using a special metal such as nickel.
――Since the bonding force is very strong, the amount of protrusion of the diamond grains bonded to the file surface can be increased, and the high concentration density of the diamond grains on the surface demonstrates good cutting force.
* It is not suitable for cutting wood because it will clog immediately.
* Be sure to perform maintenance with an old toothbrush after the work is completed.
( This is a machine translation. Please allow for possible misinterpretations in the text. )