── Reproduce the 2000s that were active in various parts of Honshu
-The Kiha 40 series is a general diesel car developed by JNR, and appeared in 1977 as a successor to the aging Kiha 10 series.
-Kiha 40 type 2000s are vehicles for warm areas of both cabs, and were operated mainly in western Japan, but also in the Kanto area and Tohoku area.
[Actual vehicle guide]
-The Kiha 40 series is a general diesel car developed by JNR as a successor to the aging Kiha 10 series diesel car, which appeared in 1977.
-In contrast to the conventional diesel cars, it adopted a large body with narrowed tails to improve comfort.
-A vehicle with both cab and one cab that can be operated in a single line was prepared, and there was a difference in the presence or absence of a toilet in the one cab.
- For each region, various specifications were manufactured, including those for cold regions such as Hokkaido, those for cold regions such as Tohoku, and those for warm regions.
-A total of 888 cars were active, mainly on non-electrified routes throughout the country.
- The Kiha 40 series has appeared in a form called the metropolitan area color, which is painted in one vermilion No. 5 color from the beginning of production.
-Kiha 40 type 2000 is a vehicle for warm regions of both cabs, and the side windows adopt a two-step rising sash window, and it was operated mainly in western Japan, but also in Kanto and Tohoku.
-Currently, although the number is reduced, local lines in various places and some have been transferred to private railways while changing appearances such as painting changes and renewal work, and continue to be active.
[point]
-Typhon is a separate part that comes with it, and you can select shutter type or slit type.
-The jumper plug preparation part is reproduced with the lid closed in the actual vehicle
- The water tank on the roof has new parts installed
-Reproduce the new body production of the two-step rising sash window in the actual vehicle
[Production features]
-Reproduce the two-step rising sash window, which is a feature of the Kiha 40 type 2000, with new production of the body and window glass
-Reproduce the underfloor with new production, such as the original DMF15 engine that was installed in the Kiha 40 series when it was released.
-Kiha 40 type 2000 generation reproduced in metropolitan area color of vermilion No. 5 one color painting at the time of appearance
- H rubber is reproduced in gray
- Hose or plug holder can be selected for the jumper plug expression on the front
- Front typhon is a separate part attached, shutter type or slit
- Either shape can be selected and installed
- The front display is replaceable, and comes with pre-printed parts [Normal (dark blue)/Rapid]
- Side indicator lights are already installed with clear parts
- Some notation is printed
- Car number, inspection notation, affiliation notation is selectable and comes with a transfer sheet
- Head and tail lights, front display with ON-OFF switch
- Light bulb color LED for headlight, red LED for taillight, and white LED for front display
- Equipped with an interior light in the driver's cab that lights up in the driver's cab at the rear
- By switching the switch, the cab is in the middle
- Even when the head and tail lights are not lit when entering, it can be reproduced in the lit state.
- Tight self-contained TN coupler standard equipment
- Minimum radius R490 passable (except S-shaped alignment)
- Trailer specification of <HO-422>
[feature]
- Trailer specification model
- Reproduced in one vermilion No. 5 metropolitan area color
- Window H rubber is reproduced in gray
-The underfloor is reproduced with equipment such as the original DMF15 engine
- The front jumper plug expression can be attached to either a hose or a plug lid.
- The front typhon is an accessory part, and you can choose to install either a shutter or a slit type.
- The front display part is replaceable and comes with pre-printed parts [Normal (dark blue) / Rapid]
- Side indicator lights are already installed with clear parts
- Some notation is printed
- Car number, inspection notation, affiliation notation, JR mark is selectable and comes with a transfer sheet
- Head and tail lights, front display with ON-OFF switch
- Light bulb color LED for headlight, red LED for taillight, and white LED for front display
- Equipped with an interior light in the cab that lights up in the cab at the rear or between connecting surfaces
- By switching the switch, the driver's cabin interior light can be turned on even when the head and tail lights are in the middle of the driver's cab, and the front display is off.
- Tight self-shaped TN coupler standard equipment
- Minimum radius R490 passable (except S-shaped alignment)
[accessories]
- Runner parts: Front display
- Runner parts: radio antenna
- Runner parts: handrails
- Runner parts: Typhon
- Runner parts: Signal flame tube
- Runner parts: steps
- Runner parts: jumper hose
- Runner parts: Jumper stopper lid
- Runner parts: air hose
- Runner parts (etching): Wiper
- Runner parts (etching): Nameplate
- Runner parts (etching): toilet inspection lid
- Parts: Hood frame
- Parts: Jig
- Parts: Switch bar
- Sticker: Destination display sabot, etc.
- Transfer sheet: car number, inspection notation, JR mark, etc.
[Organization example]
- Suigun Line (around 1980)
Kiha 40 (M) +
Kiha 40 (T)Bold : <HO-422> Kiha 40-2000 (M)
Bold underlined part : <HO-423> Kiha 40-2000 (T)
[Options sold separately]
- Interior light: <0795> E white
- JR East commercialization licensed
- JR Tokai Approved
- JR West commercialization licensed
- JR Shikoku Approved
- JR Kyushu approved
( This is a machine translation. Please allow for possible misinterpretations in the text. )