――The 4WD chassis and drift tires are already installed, so you can enjoy drifting in a small space!
――Mini-Z AWD series combined with Syncro KT-531P transmitter.
- Renewal version of AWD sports chassis based on MA-020 series chassis.
- Dedicated board with revised steering control program.
- Equipped with a volume that can adjust the effectiveness of the gyro on the chassis itself.
- Drift tires standard equipment.
- Readyset that runs immediately with a set of batteries.
- Adopts 2.4GHz Syncro KT-531P transmitter that does not require band management.
- Factory-assembled body with the same finish as the display model.
- Adopted front suspension [VCS] that draws out camber changes with suspension stroke.
- Easy to replace front suspension coil springs without tools.
- A wide variety of optional parts can be installed.
- Note) The optional ICS cannot be used. Also, since it is designed exclusively for the KT-531P transmitter, it is not compatible with KT-18, KT19, EX-5UR ASF, EX-6, EX-6R transmitters. Also, the gyro unit (sold separately: MZW446) is only compatible with the dedicated product.
- Appeared in 2014 with the name of Subaru's motor sports brand STI.
- A 4-door sedan descended from the Impreza, which was active in the World Rally Championship.
- The aggressive body line from the front to the rear is also characteristic.
- Comes with Syncro KT-531P transmitter with stylish design. In addition to the steering/throttle trim, it is also equipped with a dual rate that can adjust the amount of steering angle and an LED control function.
- It is also possible to set a training mode that suppresses the vehicle speed (it is set to training mode at the time of shipment).
- AWD readyset dedicated chassis based on the MA-020 chassis and equipped with the RA-45 unit.
- Adopted front suspension [VCS] that draws out camber changes with suspension stroke. No tools required, easy to replace the front suspension coil spring.
- The rear suspension adopts a strut type.
- Full bearing specification with 14 bearings.
- Drift tires standard equipment.
- Compatible with a dedicated gyro (sold separately: see here for compatibility), equipped with a dedicated mounting space and gyro adjustment volume.
[Technical data]
- Total length 170.5mm
- Overall width 70.0mm
- Overall height 55.0mm
- Wheelbase 98.0mm(LL)
- Tread F: 59.5mm R: 59.5mm
- Used chassis MA-020-N
- Front wheel offset narrow +1.5mm
- Rear wheel offset narrow +1.5mm
- Use radio Syncro KT-531P
- Gross weight 193g
[Kit contents]
<Contents of Readyset>
- Fully assembled chassis with built-in R/C unit
- Painting and marking factory finished plastic body
- Syncro KT-531P 2.4GHz transmitter
- mini pylon
- Pinion gear (15T, 17T, 19T, 21T)
- Spur gear (27T, 29T, 31T)
- spare nut
- foil wrench
- Pinion removal tool
[What you need before running]
<What you need before driving>
- 4 AAA batteries for transmitter
- 4 AAA dry batteries (alkaline or nickel metal hydride) for running
( This is a machine translation. Please allow for possible misinterpretations in the text. )