MA-020 Ready Set Skyline GT-R N1 R32 White (RC Model) - HobbySearch RC Model Store

This item is limited to 1 per household.

* Kyosho Mini-Z Racer Parts compatibility table.

──With a four-wheel drive chassis and drift-specific tires installed, you can enjoy drifting in a small space!
─ MINI-Z AWD series combined with Syncro KT-531P transmitter.

- We want more drivers to know about the performance of the MINI-Z AWD.
- [MINI-Z AWD Ready Set] was born to make that wish come true. The MA-020 series chassis is equipped with a VCS (variable camber suspension) that optimizes camber changes with stroke at the front, and a revised steering control program has been introduced.
- Compatible with a dedicated gyro (sold separately: MZW446), equipped with a dedicated space and gyro adjustment volume.
- The effectiveness of the gyro can be adjusted on the chassis alone, and changes in posture are reflected in steering correction, providing safe driving for beginners and support for experts to demonstrate their abilities.
- Full bearing specification with 14 additional bearings installed.
- We have created a complete chassis that is highly efficient and highly durable at an affordable price. The set is a ready set equipped with a body full of scale unique to MINI-Z and a 2.4GHz radio [Syncro KT-531P] that does not require band management.
- Equipped with drift tires as standard, you can enjoy thrilling drifting right away just by installing batteries.
- Of course, it is compatible with many of the ASC bodies that are an asset of MINI-Z (separate parts are required depending on the car model).
- Experience the driving experience that can only be experienced with an AWD chassis with the MINI-Z AWD.

- A renewed version of the AWD sports chassis based on the MA-020 series chassis.
- Dedicated platform with revised steering control program.
- Equipped with a volume that can adjust the gyro effect on the chassis alone.
- Drift tires are standard equipment.
- Ready set that can be started immediately with just a set of batteries.
- Adopts 2.4GHz Syncro KT-531P transmitter that does not require band management.
- Factory finished body with finish similar to the display model.
- Adopts a front suspension [VCS] that brings out camber changes with suspension stroke.
- Easy to replace front suspension coil springs without tools.
- A wide variety of optional parts can be installed.
- Note) Optional ICS cannot be used. Also, since it is designed exclusively for the KT-531P transmitter, it is not compatible with the KT-18, KT19, EX-5UR ASF, EX-6, and EX-6R transmitters. In addition, the gyro unit (sold separately: MZW446) is only compatible with dedicated products.

[Technical data]
- Total length 165.0mm
- Overall width 71.0mm
- Overall height 50.0mm
- Wheelbase 94.0mm(L)
- Tread F: 59.5mm R: 59.5mm
- Chassis used MA-020-N
- Front wheel offset narrow +1.5mm
- Rear wheel offset narrow +1.5mm
- Radio used: Syncro KT-531P

[Kit contents]
- Completely assembled chassis with R/C unit installed
- Painted and marked factory completed plastic body
- Syncro KT-531P 2.4GHz transmitter
- Mini pylon
- Pinion gear (15T, 17T, 19T, 21T)
- Spur gear (27T, 29T, 31T)
- Spare nut
- foil wrench
- Pinion removal tool

[What you need before driving]
- 4 AAA batteries for transmitter