* This item cannot be canceled.
- Contrary to its funny visuals, it is an American full-size van that pushes through roads with high driving performance.
- The combination of a body designed in the image of an American full-size van from the good old days and a chassis designed for light and sporty driving is the ultimate in pure R/C driving enjoyment, regardless of whether it is fast or slow. Fan model, [MAD VAN] is here! The FZ02L-BT chassis, which has improved maintainability by minimizing the number of parts, has a simple design, but with front and rear stiffeners, reinforcing ribs on each part, and carefully selected materials, it has high strength and rigidity suitable for driving. ensure.
- In addition, by adopting a design that is as symmetrical as possible, the synergistic effect of a suspension with excellent front-to-rear balance and a power source that matches the car's class has achieved straightforward handling without any peculiarities.
- On top of that, front and rear gear differentials, oil dampers, and full ball bearings are used.
- It also ensures high durability and impact resistance to provide reliable support for drivers.
- In addition, the large diameter and wide tires with almighty characteristics that ensure high grip power by adopting a soft compound and inner sponge, and the shoulder shape is moderately rounded, so it can be used not only for off-road driving, but also for off-road driving. Demonstrates high running performance even in on-road driving.
- It's also a big attraction that you can play without choosing a place to run.
- What's more, this is a factory-completed readyset that includes everything, so you can start driving immediately by purchasing a driving battery, a driving battery charger, and 4 AA batteries for the transmitter separately.
- Contrary to the funny appearance, let's run the road with MAD VAN where you can fully enjoy full-fledged driving!
- The body is designed in the image of American full-size cars in the 1970s and 1980s, and the body color is metallic purple, which is still popular in the United States.
- A decal that allows you to change the front grille/coloring, and a separate roof spoiler made of polycarbonate that enhances driving performance are included, allowing customers to customize it to their liking.
- The main chassis uses a lightweight, high-rigidity glass-reinforced 66 nylon resin bathtub.
- 66 nylon is used for the suspension arm. Achieves a good balance of flexibility that absorbs impact and rigidity around the foot.
- Equipped with bevel gear type differential gears on the front and rear. Ensures smooth turning when cornering.
- Full ball bearing specification equipped with ball bearings for all drive system bearings. Efficient transmission of motor power.
- Equipped with 550 size 14 turn `G14L` motor as standard equipment. Equipped with a steel plate ring to generate powerful torque.
- Front and rear suspensions are equipped with 12mm diameter big bore oil dampers. Absorbs shock from the road surface during off-road driving and realizes stable driving.
- The front knuckle arm uses ball-connected kingpins on the top and bottom. By moving the front upper suspension arm position back and forth with a spacer, the caster angle can be easily changed in 3 steps.
- The front and rear knuckle arms and suspension arms are common to the left and right. Increase compatibility of spare parts.
- Since the motor mount has mounting holes according to the pinion gear, troublesome backlash adjustment is unnecessary. Compatible with S20T to 29T.
- ESC adopts waterproof 60A `KA060-91W` with back. It is also possible to switch between Ni-MH and LiPo batteries. (Set to LiPo mode when shipped from the factory)
- Shifted 20T pinion gear and 76T spur gear are used for primary reduction. Demonstrate torque corresponding to large diameter tires. Equipped with a slipper clutch as standard to protect gears from unexpected impacts.
- The large-diameter monster truck tires use a soft compound and are equipped with an inner sponge. Good grip both on and off.
- Use button screws with hexagonal holes for each part. Reliable tightening torque can be applied, and maintenance can be done with fewer tools.
[Technical data]
- Total length 383mm (including body)
- Width 323mm (including body)
- Overall height 200mm (including body)
- Wheelbase 274mm
- Tread (F/R common) 250mm
- Tire (F/R common) φ110×70mm
- Gear ratio 11.69:1
- Motor G14L
- Gross weight about 2,050g (when using 7.2V3600 NiMH)
[Readyset contents]
- Factory assembled chassis with R/C unit installed
- Coloring, Decals, Assembled Body
- Syncro KT-231P+ transmitter
- Hex wrench
- Spanner
- Setting change parts
[What you need before running]
- 4 AA batteries for transmitter
- Driving battery Recommended:
・KYOSHO SPEED HOUSE 7.2V 22HV Ni-MH Battery 71322
・KYOSHO SPEED HOUSE 7.2V 36HV Ni-MH Battery 71324
・Gens ace LiPo 4000 straight pack (45C/7.4V) GAB4202
- Travel battery charger Recommended:
・KYOSHO SPEED HOUSE C-02B AC peak charger 72002B
・USB Charger 72203 for 7.2V NiMH
* Ni-MH dedicated charger
- various tools
( This is a machine translation. Please allow for possible misinterpretations in the text. )