* This item cannot be canceled.
- An electric racing buggy full of the latest trends that allows you to enjoy circuit driving right out of the box
- Inferno MP9e, a 1/8 scale electric 4WD racing buggy that has been active in big races around the world.
- And [MP9e Evo.] has matured by incorporating trends that change day by day.
- [MP9e Evo. V2] is a low-priced readyset based on such a full-fledged competition model.
- Maintaining the flat maneuverability, excellent aerial attitude controllability, and high maneuverability that have been highly evaluated in the previous model, the chassis layout has been renewed to achieve excellent balance and controllable maneuverability.
- In addition, due to the synergistic effect with the electric-only aero body, the elements required for a racing buggy, such as turning performance, traction performance, and gap running performance, are further enhanced.
- And, the power system, which can be said to be the cornerstone of driving, is equipped with KYOSHO SPEED HOUSE's new brushless motor and ESC as standard equipment, which allows you to enjoy powerful driving.
- What's more, it's a factory-completed readyset with everything you need, so you can start driving right away just by purchasing a running battery, charging it, and purchasing a battery for the transmitter. It can be said that it is a perfect one for circuit debut.
- The long type front suspension arm for TKI4, which has been strengthened by adding ribs, achieves excellent steering response. The front hub carrier also uses a larger caster angle of 17.5° to ensure driving stability.
- The battery is placed at a lower position to promote a lower center of gravity, and a belt fixing system is adopted that does not affect chassis twist that contributes to roll and pitch.
- Readyset with complete chassis and body that comes with everything except the running battery, charger, and transmitter battery.
- KYOSHO SPEED HOUSE brushless motor & ESC supports powerful driving.
- Waterproof and high-torque steering servo [KS5031-09MW] is standard equipment.
- Equipped with a stabilizer that suppresses body roll that occurs during cornering and contributes to improved steering response.
- Detailed settings such as wheelbase, tread, toe angle, camber angle, caster angle, and roll center are possible.
- The rear suspension arm comes standard with a dust guard that prevents driveline trouble.
-Decaled wheels that achieve both high visibility and improved visuals.
- Full bearing specification.
- Optional parts for the Inferno MP9, which boasts a rich lineup, can be used.
[Technical data]
- Total length 490mm
- Width 307mm
- Overall height 180mm
- Wheelbase 325mm (changeable with rear hub collar)
- Tread (F/R) 254mm (Three types of rear and two types of front can be changed by replacing bushings)
- Tire (F/R) φ116×44mm)
- Gross weight about 3370g
- Motor KYOSHO SPEED HOUSE・TORX 8 brushless motor
- Battery size that can be installed: Approx. 140x48x50mm
[Readyset contents]
- Fully assembled chassis with R/C mechanism installed
- Pre-cut and colored printed body
- KYOSHO SPEED HOUSE brushless motor & ESC installed
- Syncro KT-331P transmitter
- 1.5, 2.0, 2.5, 3.0mm L-shaped hex wrench
- Cross wrench (large)
- 17mm wheel wrench
[What you need before running]
- 4 AA batteries for transmitter
- 2 driving batteries (recommended: 7.2V Ni-MH battery)
- Charger for running battery
- Stabilized power supply
( This is a machine translation. Please allow for possible misinterpretations in the text. )