Product Description

──The symbol of Kanmon! The stainless steel-bodied EF81-300!

- The EF81 type was introduced in 1968 as an electric locomotive compatible with both DC and 50/60Hz AC, and is used as the standard AC/DC locomotive.
- Four of the 300 series locomotives were introduced with stainless steel bodies for use in the Kanmon Tunnel, and the 303 is still in service within Kyushu today, retaining its unpainted stainless steel body.

[Actual vehicle guide]
- The EF81-300 series, four of which were introduced as locomotives for the Kanmon Tunnel, are characterized by their stainless steel bodies as a measure against salt damage in the Kanmon Tunnel, and the No. 303 locomotive is still in service within Kyushu to this day, remaining unpainted.
- Of the EF81 series, the 400 series was modified from the 0 series to replace the EF30 series used in the Kanmon Tunnel, and multiple-unit overall control was added.
- Currently, along with the 303, 450 and 500 series, it is used to pull freight trains within Kyushu.
- In the future, they are scheduled to be replaced by additional EF510-300 series locomotives.

[point]
- Reproduces the appearance of the inspection cover installed under the driver's cab window

[Product Features]
- H-rubber is reproduced in black
- Rooftop equipment is reproduced in gray
- Integrated plate wheel
- Headlights are lit by warm white LEDs and have an ON-OFF switch
- The power terminal is installed inside the roof monitor.
- Insulator parts are reproduced in green
- JR mark and vehicle markings are printed
- Etching plate for maker's plate and end marking included
- Minimum radius of R600 can be passed (excluding S-shaped lines)

[About <HO-2029>]
- Newly produced 300 series with inspection cover installed under the driver's cab window
- The roof under the pantograph is reproduced in the body color.
- Skirt with additional jumper plugs
- Car number can be selected and etched number plate is included [EF81-303・304]
- Ward name tag sticker included

[Features]
- Reproduces the appearance of an inspection cover installed under the driver's cab window
- Rooftop equipment is reproduced in gray
- The roof under the pantograph is reproduced in the body color.
- H-rubber is reproduced in black
- Skirt with additional jumper plugs
- Integrated plate wheel
- Headlights are lit by warm white LEDs and have an ON-OFF switch
- The power terminal is installed inside the roof monitor.
- Insulator parts are reproduced in green
- Vehicle number can be selected and etched number plate included
[EF81-303・304]
- Ward name tag sticker included
- JR mark and vehicle markings are printed
- Etching plate for maker's plate and end marking included

[Set contents]
- EF81-300 (2nd generation)

[accessories]
- Runner parts (etching): Number plate
- Runner parts (etching): maker's plate, end markings
- Runner parts (etching): Wiper
- Runner parts (etching): Hook
- Runner parts: Handrail
- Runner parts: dolly steps, release levers, etc.
- Runner parts: Signal flare
- Parts: Whistle
- Parts: Radio antenna
- Sticker: Ward name tag

[Special Notes]
※＜HO-131＞,＜HO-132＞, and＜HO-185＞ will be discontinued.

- JR Freight approved



Item Size/Weight : 32 x 12.6 x 7 cm / 830g

Product Specifications

Item series

Electric Locomotive

Organization

Japan National Railways (JNR)

Region

Chugoku , Kyushu

Item code

HO-2029

JAN code

4543736520290

Purchase Information