Product Description
[About the actual car]
This 35-ton mobile machine was manufactured by Hitachi in 1970 for use in shunting operations at the paper mill adjacent to Kanamachi Station.
It was in service until the dedicated line was abolished in the spring of 2003.
The bogie frame is similar to the TR41C type bogie used for freight cars.
[About the model]
This is a paper kit made up mainly of laser-cut hard paper.
It reproduces the low bonnet and the characteristic floorboards extended at the ends of the car.
The delicate handrails, release levers, radiator grille and side window frames are etched into the model.
Includes 3D printed brake cylinder, air tank, sand box, chimney, and bogie frame springs.
Masking sheets for painting window rubbers and body stripes are included.
Comes with a special decal printed with a zebra pattern on the end beam.
[Contents]
Assembly Instructions
Parts Sheet
Decal Sheet
Masking sheet
Screws and nuts
Etching parts
3D Printed Parts
[Products required in addition to this kit]
Tenshodo coreless power transformer 24.5P x 2
IMON HO301 coupler x 2
Echo Model Air Hose Right-Facing (3603)
Echo Model Typhon (751)
WAVE H Eyes 1 Mini Clear (OP-251)
Brass wire 0.4mm
PVC board for window cells
Surfacers and paints
*We take great care in our manufacturing, but there may be some areas that are not laser cut properly. In that case, please make a cut with a utility knife or similar to fix it.
* Wash resin parts thoroughly and fill in any rough surfaces with primer or putty.
( This is a machine translation. Please allow for possible misinterpretations in the text. )
Item Size/Weight : 24.4 x 14.5 x 2.8 cm / 118g
Product Specifications
- Item code
- 494
- JAN code
- 4580594094945
Purchase Information
* Hurry! This item is almost sold out!
This item is limited to 1 per household.