- The new rail Tomix compared to the conventional rail products, the pursuit of ease of handling and appearance of the dense
Is [Fine Track]. Standard rail, rail product lineup inherited the traditional ones,
Has been achieved fully compatible.
- Handling Precautions fine track
1, removal of the rails please go to the horizontal. Please do not twist. At an angle of unreasonable
And repeat the insertion and withdrawal, it will damage the tip rail, such as Joyner.
2, before you drive, please make sure that it is securely connected to the rail. If the rail was connected
Will be to each other and there is a step, not only to be derailed vehicle, damaging the rail early.
3, when electricity from the power unit to power the rail, you can use your DC feeder dedicated N
Please.
4, in order to maintain a good turn-on function of the rails, sold separately frequently <6401> of all rail rail
After brushing such as cleaner, please use a dry cloth. Please note that without the oil, etc. in particular.
5, (the base) is made of ABS resin ballast, subject to direct sunlight (the location of the high temperature heating appliances
Please do not leave, etc.) near. May be deformed. In addition, chemicals such as thinner
Please note.
※ There is the color of the rail ballast on how to paint with a rose. Please acknowledge.
- For Joyner
1, if you want to connect the rails, to adjust to (or slightly upward acceleration) horizontal orientation of the Joyner
Please.
2, if Joyner is out, please note the orientation of the Joyner mounting. Sharp edges
Please do not hurt, etc., etc..
※ (sold separately) <6005> Joiner repair, please do not use absolutely. Damage to the part Joyner
Can cause.
( This is a machine translation. Please allow for possible misinterpretations in the text. )