- AU75 is a typical form of centralized JNR cooler.
- Cover is characterized by different manufacturers, in terms of appearance be roughly categorized into Toshiba Mitsubishi (M) Hitachi (S) (H)
There are three types. Vehicle to be mounting type S 101,103,111,113 commercialized this time,
I have a wide variety of systems, such as 115,117,185,201,401,403,415,421,423. In terms of appearance of the shoulder
The opening of the louver is large, and is lined with fine fins. In addition, the number of the blades of the fan
More than other types, except that there are three ribs thick of the network also for reinforcement, two places left and right hook,
Is characterized by the four corners of the mounting bolt cover each side or it has become skewed.
[Product Features]
- Such as the appearance of a large louver openings and many of the shoulder, the number of the blades of the fan blower features S
Was into model (manufactured by Toshiba) type. Representation of each bolt and panel lines is, of course,
Point and that is the angle of the louver fins three shoulders are all different, one horizontal and the vertical direction of the web
Stay tuned for details in the details, such as the two reinforcing ribs.
- Two types of mounting feet are molded. Round pin-shaped mounting foot is KATO, Micro Ace,
Claw-shaped mounting feet square is made into a shape that corresponds to the vehicle TOMIX, the WIN. No longer needed
You can cut the mounting foot of the way, you can be easily installed.
(Mounting foot corresponds to the product cooler has become another part.)
- You take all the mounting feet, if drilling on the roof, can be mounted to other products and non-air-conditioned car.
- The material for plastic paint, plastic adhesives can be used in the same way as Purakitto made ABS.
( This is a machine translation. Please allow for possible misinterpretations in the text. )