Product Description

Explanation vehicle;
● M32 Series is a tank recovery vehicle and the vehicle was based on the M4 Sherman, was worn in the front
Has been developed for the purpose of combat vehicles to recover as soon as possible. M31 corresponds to the predecessor of the M3 medium tank
Had been using as a base vehicle, main battle tanks that has been transferred to M4 Sherman, M4
It was to be a new development based on Sherman. Based on operational experience in the M31,
Equipped with a crane of a large body of the M4 to the removal the turret, the M32 in internal Winch
Various devices have been made was to allow for a variety of towing and recovery method. Of crane
Replacement of main boom and turret of a tank engine was overturned and the stack can cause forward in
Vehicle rescue is possible, in the state where the storage is to be towed behind a tow truck vehicles as
I was able. Before and after the vehicle has tow hooks are equipped with large, small and large tow Dorouba two kinds of (
I was able to do the towing of broken-down car) is used to stick. The recovery vehicles and spare equipment to a variety of
Parts are built, was it possible to repair an emergency. Objectives and recovery of vehicles at the front
Because it, in front of the body is 81mm M1 mortars for firing is equipped with a smoke screen,
To the top surface of the fighting compartment is M2 heavy machine gun was mounted on the ring has been mounted as a self-defense firearms.
And M32 series is based on the M32, M4A1 by the difference of the form that was the source, based on the M4
Was what was known as the M32B3 is based on the, M4A3 M32B1. M32B1 1943
Mass production will start from December, the M32B1 is about half of the total production of the M32 series tanks number 1577
Was occupied. M32B1 participated in the Korean War after the war, also granted to Self-Defense Forces, in the 1970s
It continued to be used until the second half.

Remarks [Product]
● the form was modeled tank recovery vehicle based on the M4A1, during the Second World War of M32B1.
You can reproduce the main boom of a large state caused by letting the moving and storage time as well as the vehicle.
New development, including the top most of the upper structure body, also combat other than the driver's chamber section
Was reproduced faithfully.
Chamber and rack bullet smokescreen combat began to be mounted on the wall, the seat occupant to be accommodated under the floor
The mosquito is also part of a large winch wire, extending in three directions, depending on the state of use from the floor hatch
Mechanism of transmission of the rope can be reproduced as well as the vehicle.
Dourouba of two species to be mounted on the body can also be removed Crossed the state, state towing of vehicles
Can be reproduced. M1 mortars are mounted on the vehicle front body, when used crane
Snatch fixed plate for large fixed wheel stop, to fix the ride height of the suspension, large
Realistic, such as block (pulley), and a variety of equipment for the recovery. Was removed and each state
By, you can reproduce the scene a variety of recovery. Mark is a front slide of northwestern Europe
We prepared two types of U.S. military markings.
This is an item which used to be Tasca Model.
Item Size/Weight : 38.5 x 24.8 x 6 cm / 642g

Product Specifications

Country

USA

Item code

35-026

JAN code

4571229090753

Purchase Information