Product Description
- New launch of rear locomotive cab for various locomotives! !
- Locomotives driving a variety of trains and performing various activities.
- We will release the rear part of the indoor cabin which reproduces the brave figure even more realistically.
- Installation is very easy.
- You can reproduce the rear device seen from the front simply by pasting it on a light-shielding part.
- The parts are cut by laser and we are making it easier to paste.
- Please do use it for upgrading your existing vehicle.
- Contents: EF 510 Cabin · EF 81 Cabin · ED 79 Cab for each operator, DD51 SG room seal · parts · Smoke seal for SG window 2 parts
- How to paste (EF 510):
(1) Remove the locomotive parts of each locomotive and remove parts of the driver's cab.
(2) Carefully peel off the seal and stick it to the surface of the part. Paste on the front light guiding mold surface and paste the side. Make a concave shape and paste long and thin parts in the back.
(3) Return the pasted part to its original position. We make it separately on 1st and 2nd, so please be careful when installing. (The one with the long high voltage line is No. 1)
(4) Reassemble it as it was and complete it.
- How to paste (EF 81 · ED 79):
(1) Remove the locomotive parts of each locomotive and remove parts of the driver's cab.
(2) Carefully peel off the seal and stick it to the surface of the part.
(3) Return the pasted part to its original position. We make it separately on 1st and 2nd, so please be careful when installing. (The shorter one of high-voltage wires is No. 1)
(4) Reassemble it as it was and complete it.
- How to paste (DD 51):
※ Note: Can not be used with auxiliary weight.
- How to paste:
(1) Remove the locomotive cab circle.
(2) Carefully peel off the seal and stick it so that it wraps around the surface of the SG chamber. Put the double-sided tape on the bottom and paste it so that the switch will escape. It becomes more realistic if you paint the curved part inside the SG room as silver and the other as black.
(3) Carefully peel off the smoke seal and stick it on the back side of the SG room side window.
(4) Reassemble it as it was and complete it.
- Material used: Resin adhesive sheet
* Although we are making reference to actual cars, there are parts that differ from actual cars.
( This is a machine translation. Please allow for possible misinterpretations in the text. )
Item Size/Weight : 12.5 x 7 x 0.5 cm / 5g
Product Specifications
- Item code
- 10287
- JAN code
- 4582342842877
Purchase Information
This item is limited to 24 per household.