L Spiral Bridge Kit for Kato Unitrack Hierarchical Expansion Set (1 Turn + Straight) (Unassembled Kit) (Model Train) - HobbySearch Model Train N Store

This item is limited to 24 per household.

See L Spiral Bridge Kit for Kato Unitrack Basic Set (Unassembled Kit) (Model Train) also.

[ Recommeded Tracks ]
- Unitrack Curved Track R249-45 degree (R9 3/4-45 degree) < R249-45 > (4pcs.)
- Unitrack Curved Track R282-45 degree (R11-45 degree) < R282-45 > (4pcs.)
- Unitrack Curved Track R315-45 degree (R12 3/8-45 degree) < R315-45 > (4pcs.)
- Unitrack Curved Track R348-45 degree (R13 3/4-45 degree) < R348-45 > (4pcs.)
- Unitrack Straight Track 248mm (9 3/4``) < S248 > (4pcs.)

[Overview]
- Is a budget spiral bridge assembly kit is simple using a standard curve line.

[Features]
- Use the standard curve line so you can run most of the vehicle.
- So we set the gradient to about 3 percent, it will rise to ease most of the vehicle.
- It is accurate and easy to assemble kit that was laser-cut wooden plywood. Also, it does not take even fabrication time.
- Two sets using, you spread is how to use depending on the idea, such as it is left and right spiral of the loop line.
- For processing materials that are easy, easy it is remodeling, and the like.
※ rail is not included.

[specification]
- Scale: N gauge size, 1/150
- Rise Height: 1 rotation per 54mm
- Gradient: about 3.5 to 2.5%
- Piers pitch: 30 degrees
- Maximum diameter: 756mm (R348)
- Maximum height: + 54mm (per hierarchy)
- Material: 3mm wooden plywood

Item Size/Weight : 15.7 x 13 x 1.7 cm / 61g