idola 29 Masking Tape Cut Guide 3 Plate Type (Ultra Slim Linear) (Hobby Tool) (Mask) - HobbySearch Hobby Tool Store

This item is limited to 10 per household.

-Cutting template guide for idola etching masking tape and masking sheet.
-It is a template that can make a masking tape with an extremely narrow line.

-The 3rd part of the Masking Tape Cut Guide Series [Extra Fine] can be cut to 1.0mm or less, which is even thinner than the first.
-6mm and 10mm width masking tape 0.3mm 0.5 0.6 0.7 0.8 0.9 1.0 1.2mm width grooves are carved at equal intervals on a 0.2mm thick stainless steel plate, and the masking tape is pasted according to the guideline 0.1 Cut along the groove of mm with a design knife.
-After cutting, use the tip of a design knife or tweezers to clean it and attach it to the parts you want to separate.

-0.2mm thick stainless steel etching produced in domestic factory.
-Very high quality with no bending or burrs around the board.
-Plate size: 67mm length 105mm width

Item Size/Weight : 14 x 8 x 0.1 cm / 14g