[What is the Plastic Model Improvement Committee? ]
--Comfortable modeling in a tidy environment.
――In order to build an ideal model life that everyone can dream of, the [Plastic Model Improvement Committee] was born as a new brand to deliver to everyone from beginners to veterans who make plastic models.
[What is Tarena Inner Cap]
--When removing the paint from the bottle, the paint adheres to the edges and threads of the bottle, causing troublesome wiping and waste of paint, and the adhered paint can also cause the lid to stick.
-[Tarena Inner Cap] is a special inner cap that allows you to pour paint without dripping by attaching it to a paint bottle, making it easier to remove the paint from the bottle.
――After use, you can store it with the lid closed while it is still attached to the bottle.
――Since we have a lineup of 5 types of shapes, we can handle a wide range of bottles of paint for various models.
[Just open the lid and put it on! ]
――Installation is completed by simply attaching the [Tarena Inner Cap] that matches the diameter of the paint bottle with a single touch.
――The ultra-thin design makes it easy to drip even highly viscous paint, and you can pour cleanly without soiling the edges and screw grooves of the bottle.
――The paint can be taken out of the bottle as it is without bending the stick or using a stirrer or muddler, which leads to a reduction in paint waste.
--The highly solvent-resistant material makes it compatible with water-based, lacquer, and enamel paints.
* Mix the paint well before use. * When pouring paint, pour it slowly and then slowly return it.
* Before installing the inner cap, wipe off the paint adhering to the spout of the paint bottle (contact surface with the inner cap) with a cotton swab before installing.
[The lid can be closed while wearing it! ]
――After taking out the paint, you can close the lid with the [Dare Inner Cap] attached without removing it from the bottle.
――The special shape prevents the paint from leaking and can be stored with high airtightness.
――When you use the paint again, you can pour out the paint by opening the lid as before, so there is no need to reattach or clean it.
――In addition, since the paint does not easily adhere to the edges and screw grooves of the bottle, the sticking of the lid due to dry paint is eased.
* If paint remains on the edge, wipe it off before closing the lid.
* When the inner caps [01] to [04] are attached, the total height when the lid is closed will be slightly higher than when the lid is not attached.
* Since the mounting method of the inner Cap [05] is different, the total height will be higher by one lid.
[Paint preservation of airbrush painting, great success! ]
――If you dilute the paint with an empty spare bottle equipped with a dripping inner cap, you can pour the paint directly into the cup of the airbrush without dripping.
――Since the excess diluted paint can be stored and reused by closing the lid as it is, waste of paint is reduced and painting efficiency is improved.
[Compatible with various model paints! ]
――Compatible with general model paints, we have a lineup of 5 types according to various bottle shapes.
[size]
・ Tarena Inner Cap [01]: 6 pieces (for T company 10ml square bottle)
・ Tarena Inner Cap [02]: 6 pieces (for T company 10ml cylindrical bottle)
・ Tarena Inner Cap [03]: 6 pieces (for C company 10ml cylindrical bottle)
・ Tarena Inner Cap [04]: 6 pieces (for G company 15ml cylindrical bottle)
・ Tarena Inner Cap [05]: 4 pieces (for G company 50ml cylindrical bottle)
* Tarena Inner Cap [04] is only compatible with lids with integrated inner plugs.
* Tarena Inner Cap [05] is also compatible with lids with integrated inner plugs and lids with separate inner plugs. When using a lid with a separate inner plug, be sure to fasten the inner plug before closing the lid.
* Not compatible with G company 10 ml cylindrical bottles, 30 ml cylindrical bottles, and paint bottles in which the lid and inner plug are not integrated.
[Precautions]
――This product does not completely prevent dripping. Liquid dripping may occur depending on the condition of the paint and the method of pouring.
――Please use after mixing the paint well.
――This product is for model paint only. Do not use as a solvent spout. (It may cause liquid leakage and dripping)
――Due to the specifications of this product, the lid closes shallowly. If you close it with full force, the product may be deformed and the lid may come off, so be careful not to close it too much.
――If you close the lid while the edge of this product is dirty, it may be difficult to open it, so wipe off the paint remaining on the edge with a cotton swab.
――Due to the specifications of this product, the paint attached to this product may become a solid when it dries, but there is no problem in use.
--Be sure to keep the paint bottle upright to prevent leakage.
—— Depending on the type of paint, the color may transfer to this product.
――Replacement with paint bottles of different colors may cause the attached paint to mix and discolor, so please use a new one for each paint.
――When reusing, attach it to a paint bottle of the same color.
――In order to maintain the airtightness, wipe off the paint remaining on the spout after use and then close the lid.
--It may not be installed properly due to individual differences and combinations of this product and the bottle.
—— Regarding the handling of paint, please use it according to the usage method of each paint manufacturer.
--If you have any problems using this product, please contact the Customer Support of the Plastic Model Improvement Committee.
( This is a machine translation. Please allow for possible misinterpretations in the text. )