Product Description

--The product is based on the CT125 Hunter Cub (Growing Red), which was launched in 2020.
--It is a Japanese domestic specification equipped with a tandem step and a muffler cover.
--The product is in a kit format that requires assembly.
――The size unique to 1/12 scale accurately reproduces detailed modeling.

[No painting required / no adhesion required]
-Each part is colored with a molding color, and the body realizes a glossy texture that can not be obtained by painting.
――The design specifications that fit the parts together make it easy to assemble.

――In the 2010s, the first Cross Cub appeared, and in 2017, the current Super Cub debuted.
――And the [CT125 Hunter Cub], which is reminiscent of the former CT110, appeared in 2020.
――The body is slightly larger than the C125, and it is finished as a leisure bike that has a powerful run at medium and low speeds. It has a characteristic shape such as a muffler like the CT110 and a square turn signal.
――The actual car is available in two colors, glowing red and matte fresco brown (as of spring 2021).

-The body uses a special molding material to reproduce a level of luster that is difficult to express by painting.
--The molding color consists of 6 types: red, black, silver, aluminum, clear, and clear red.
--The engine body is designed to be assembled in blocks with black and silver molding colors.
-The [HONDA] engravings on the left and right are reproduced with delicate mold engraving.
-The characteristic intake passage on the left rear is reproduced in two colors, matte black and body color.
--The side stand and center stand are movable.
--The switches around the handle are accurately three-dimensionalized, and the markings are reproduced with the attached stickers.
――The meter has a realistic style with transparent parts covering the cover surface.
-The wing mark in the center of the handle is represented by a sticker, and detailed parts such as the master cylinder on the right hand side are reproduced.
――The sheet has a 3-piece structure that matches the seams of the fabric, and has a matte black molding color.
--The seat can be moved (opened and closed). The area around the fuel filler port on the inside is three-dimensional, and the tank cap is a separate part that expresses the color difference.
--The tandem step can be stored or expanded, and can be changed by replacing parts.
――The distinctive rear carrier that stands out is a one-piece part that uses a slide mold.
The wheels and spokes are integrally molded and have a black molding color.
-Spokes are as thin and realistic as the Super Cub of the same series. The wheels built into the car body can rotate. The size when completed is about 165x69x109mm.
--126 parts assembled

[Attachment]
--Runner x 16
--Rubber material tire x 2
--Assembly manual x 1
--Seal x 1

* This product is a plastic model kit that requires assembly.
* The wheels of the actual vehicle are black / the spokes are silver, and there are some differences in color tone when modeling.


Item Size/Weight : 32 x 20.5 x 6.3 cm / 341g

Product Specifications

Item series

1/12 NEXT

Motor bike manufacturer

Honda

Item code

142012

JAN code

4968728142012

Purchase Information