- The Koppel B tank is a prototype of a steam locomotive with a gauge of 1067 mm, which is said to be an old design 40 HP class B tank. Isomorphic machines were enrolled in Arita Railway, Miyazaki Kotsu Railway Department, Ise Railway, Ministry of Railways, etc.
- Boxcar Wa 1 is a model of a vehicle with a wooden horizontal clapboard structure and wooden doors on a steel pillar. The prototype is a vehicle such as a pre-war Japanese car and a vehicle owned by the Omi Railway Freight Railway Museum.
- The boxed car Waff is a model of a wooden pillar with a hand brake cover on the 3rd side of the gable and a wooden door with a wooden horizontal clapboard structure. Vehicles such as Choshi Electric Railway and Kurihara Railway are used as prototypes.
*Some parts require installation work.
*Coupler selection formula
*With inscription for Wa Wafu
*Screw type coupler (for 1 car for power car) and screw type coupler/linkage coupler (for 2 cars for freight car) are included.
- Coppel B tank (straight chimney, wheel diameter 5mm specification, body color: black / with power), box car Wa 1 type (wooden door, general specification) and box car WAF (right cover specification) are included. It's a special set.
-In addition, the letter for Wa 1 type Waff and [Screw type coupler (for motor vehicle) for 1 car (2 pieces)] [Screw type coupler • Linking coupler (for freight car) for 2 cars (2 pieces each) )] is included.
- It is possible to run a train with a screw type coupler.
[set content]
- Coppel B tank (straight chimney/wheel diameter 5mm/body color: black/powered)
- Boxcar Wa 1 type (wooden door, general specification)
- Waff with lid (right cover specification)
- Threaded coupler (for locomotives)
- Threaded coupler/chain coupler (for freight cars/passenger cars)
[Coppel B tank]
- Straight chimney・Wheel diameter 5mm・Body color: black/powered
- Product content
・ Painted finished product (simple rod specification)
・Body length: Approximately 37.5mm (excluding coupler)
・Body width: Approximately 18mm Body height: Approximately 25mm
・Wheel diameter: 5mm
・Body: Plastic
・Motor: 3V (rated voltage 3V)
- accessories
・Coupler mounting selection type: Arnold coupler x 2, drawbar hook x 2
・ Buffer (mounting selection type) x 4
・Dummy knuckle x 1
・Drawbar x 1
・ Plastic steam pipe (mounting type) x 1
[Box car Wa 1 type]
- Wooden door, general specifications
- Product content
・Painted finished product
・Body length: Approximately 39mm (excluding couplers and buffers)
・Body Width: Approx. 17mm
・Body height: about 22mm
・Wheel diameter: 5.6mm
・Body: Plastic
- accessories
・Coupler mounting selection type: Arnold coupler x 2, drawbar hook x 2
・ Buffer (mounting selection type) x 5
・Dummy knuckle x 1
・Drawbar x 2
・Inscription letter x 1
[Waffle car waffle]
- Right cover specification
- Product content
・Painted finished product
・Body length: approx. 42mm (excluding couplers and buffers)
・Body Width: Approx. 17mm
・Body height: about 22mm
・Wheel diameter: 5.6mm
・Body: Plastic
- accessories
・Coupler mounting selection type Arnold coupler x 2, drawbar hook x 2
・ Buffer (mounting selection type) x 5
・Dummy knuckle x 1
・Drawbar x 2
・Inscription letter x 1
* The product contents and accessories of the covered vehicle are subject to change. Please note.
* Some parts attached to each vehicle require installation work.
*Each image is a prototype with parts attached. Products and specifications may differ.
* The covered vehicle is an image.
( This is a machine translation. Please allow for possible misinterpretations in the text. )