Product Description

- The arm of the model fell off while it was on display at an exhibition...
- You can easily reinforce the joints and moving parts of such loose character models.
- Due to the change in tape material, the strength has increased, making it easier to bend and has a longer lifespan.

- Joint Guard is a special reinforcing tape that improves the looseness of the joints and moving parts of mechanical models and movable figures.
- With the renewal, the material has been changed to stronger PET, which makes it more flexible and stretches when moved, making it less likely to tear.
- Also, a fold line has been added to each tape to make it easier to bend and apply it to moving parts.
- Up until now, to strengthen loose joints, it was necessary to harden them with instant adhesive and then scrape and reapply them, or cut out small pieces of tape yourself and apply them to the joints. .
- This product was developed to allow you to easily maintain poses for long periods of time even with loose joints.
- The reinforcing tape has been cut into strips into 6 sizes to suit various shafts, etc.
- Also, since it is a special soft tape with a thin non-slip coating on its surface, it can strengthen joints without putting excessive tension on the parts.
- In particular, PS joint parts, which are often found in the latest kits, tend to loosen easily, making it ideal for such joints and movable parts.
- Also, a total of 1,054 pieces of reinforcing tape are listed, so one piece of tape can be used for dozens of mechanical models, making it highly cost-effective.

- Product contents:
・Joint guard (joint reinforcement tape)
- Size: Approx. 105x175mm
- Number of posts: 1,054
- Tape color: silver gray

[How to use]
(1) Select a tape large enough to cover about 2/3 of the loose part and attach it.
(2) If necessary, please stack 1 to 3 sheets depending on the degree of loosening.


Item Size/Weight : 17.8 x 11.1 x 0.1 cm / 11g

Product Specifications

Item code

JG-RE1-A1

JAN code

4580610590574

Purchase Information