Product Description
[Official manufacturer introduction video]
-- Introducing an HO cleaning car based on the WAM80000 series!
[What is a rail cleaning car?]
- The Rail Cleaning Car is a vehicle that can remove debris and dirt from the rails while moving.
- In 2000, we released a cleaning car for N gauge, and now, after 24 years, we are releasing a cleaning car for HO rails.
*The cleaning car is not self-propelled and requires a separate power vehicle to operate.
*Please prepare commercially available batteries separately.
[point]
- Motor powered by 2 AA batteries
- Slide the back panel and insert two AA batteries (sold separately) to use.
The rotation speed can be switched between HIGH and LOW with the switch on the top, or OFF.
- The suction fan and attachments suck up the dirt and dust on the rails! You can dispose of the collected dirt by removing the roof.
- By replacing the suction fan with a disk, the top surface of the rail can be cleaned!
- If it is very dirty, clean it thoroughly with a dry (abrasive cloth) disc.
・Clean light dirt with a wet (cloth) disc
Cleaning using a rail cleaner with a felt stick and a wet (cloth) disc
[Product features]
- A rail cleaning car with an exterior inspired by the WAM80000, Japan's leading two-axle freight car
- Can be used with commercially available 16.5mm gauge rails
- The design is free and owned by Tomii Electric Railway, and has a private freight car style that can be used on the JNR.
- Powered by dry batteries, the cleaning car can be connected to a locomotive or other powered vehicle and run on the tracks, allowing cleaning to be performed without being affected by the condition of the rails or the power supply method.
- Requires 2 AA batteries (sold separately) (commercially available alkaline batteries)
- Equipped with a power switch on the top of the vehicle, the motor rotation can be switched between HIGH and LOW and OFF.
- Suction fan and attachments suck up dirt and dust from the tracks
- The rail top surface can be cleaned by replacing the suction fan with various disks. If it is very dirty, use the dry type (abrasive cloth), otherwise use the wet type (cloth).
- By attaching the included felt stick and wet disc and soaking the felt stick in rail cleaner, more effective cleaning is possible.
- Coupler is equipped with a coupler that can be connected to a Kadee coupler
- Minimum radius of R356 can be passed (excluding S-shaped lines)
[Set contents]
- HO rail cleaning car (brown)
[accessories]
- Parts: Felt sticks
- Parts: Dry (abrasive cloth) disc
- Parts: Wet (cloth) disc
( This is a machine translation. Please allow for possible misinterpretations in the text. )
*New Product Information (PDF) has been posted on Web site of TOMIX.
*Product Information has been posted on Web site of TOMIX.
*Introduction video has been posted on TOMYTEC CHANNEL of YouTube.
[ Related Products ]
- 1/80(HO) HO Track Cleaning Car Exchange Parts Set
Item Size/Weight : 23.5 x 8.5 x 5 cm / 194g
Product Specifications
- Item code
- HO-735
- JAN code
- 4543736967354
Purchase Information
This item is limited to 12 per household.