Mecha Kame III (Science / Craft) - HobbySearch Toy Store

Copyright EK Japan CO, LTD.All Rights Reserved.
See also.
Check Screwdriver out also.
Check Nipper out also.
Check Pliers out also.
See Micro Hammer (Four Kind of Exchange Head Attachment) (Hobby Tool) also.
See OLFA Cutter (Hobby Tool) also.

- A robot that uses a sound sensor, move in response, such as the sound of hitting the hand, is a cute robot hemispherical.
- Such as have come with attached pen holder is a felt-tip pen, you can also have drawn a figure by the circle and straight line.
- Each time you hit the hand, (1) turning on the spot → (2) Stop → (3) forward → (4) will continue on behalf of cut is movement in the order of the stop.
- Easy-to-understand assembly instructions and the separate soldering of Reference [soldering tiger winding] (MR-974 only) is attached. You can also challenge to work with peace of mind in the first one.
- Use batteries (sold separately): single 3 × 2 this
- Current consumption: about 230mA (when traveling), about 10mA (when stopped)
- Difficulty 3
- Work time: 3 to about 4 hours
- Age: 10 years of age or older.
- Tools required: driver (plus), nippers, pliers, hammer, cutter, soldering iron

Item Size : 27 x 17 x 8 cm