Product Description
- The EF66 was a locomotive capable of single-unit pulling of a 1,000-ton high-speed freight train with a top speed of 100 km/h. Mass production began in 1968, with 55 0-type locomotives manufactured.
- From 1985, it was selected to pull the Blue Train and was active.
- From the No. 21 onwards, later models were equipped with a canopy over the driver's cab window from the time of manufacture, the main resistor exhaust vent on the side shoulder of the car body was divided into four parts, and the equipment entrance on the side of the car body was located in the center.
[Actual vehicle guide]
- The EF66 type was mass-produced in 1968 as a locomotive capable of single-unit pulling a 1,000-ton high-speed freight train with a top speed of 100 km/h.
- After the timetable change in 1985, it also played an active role in pulling the Blue Train on the Tokaido and Sanyo Main Lines.
- The early model up to the No. 15 locomotive did not have a canopy over the driver's cab window, but some cars were later modified to have one installed.
- When the Japanese National Railways was privatized in 1987, it was transferred to JR West and JR Freight.
[point]
- Dummy coupler with piping is reproduced
- Redesigned to reproduce a realistic body shape
- Various head marks available (only for <7141>) Separately sold items will also be reproduced at the same time
[Product Features]
- Newly produced vehicle body etc.
- See-through driver's cab
- Equipped with PS17 pantograph
- Headlights are equipped with a constant light board
- Headlights are lit by incandescent LEDs
- Silver headlight rim
- Front handrail (vertical) is included as a separate part
- Release lever is attached as a separate part
- Dummy coupler included to replicate the piping around the coupler
- Wheels with wheel cores
- Flywheel-equipped power unit, black bogie frame, black wheels
- Uses M-13 motor
- Comes with a self-locking TN coupler
- Comes with a printed head mark [Asakaze/Hayabusa]
- Separate parts for attaching the head mark are included
- JR mark printed
- Reproduce the jumper plug on the skirt
- Number plate parts [EF66-40, 48, 50, 55] included
[accessories]
- Runner parts: Printed head mark
- Runner parts: Maker's plate
- Runner parts: Number plate
- Runner parts: antenna, whistle
- Runner parts: Signal flare
- Runner parts: Handrail
- Parts: Ornamental Belt
- Parts: Dummy coupler, dummy coupler receiver
- Parts: TN coupler
*＜2163＞＜2164＞ will be discontinued.
- Licensed for commercialization by JR East
- Licensed for commercialization by JR West
( This is a machine translation. Please allow for possible misinterpretations in the text. )
Item Size/Weight : 18 x 6.5 x 3 cm / 191g
Product Specifications
- Item code
- 7141
- JAN code
- 4543736071419
Purchase Information
* Hurry! This item is almost sold out!
This item is limited to 1 per household.